金属压型板于边角处的设计细节  

Designing Details for Joint and Corner Locations of Metal Profiled Panel

作　　者：孙世谱 曾卓林 Sun Shipu Zeng Zhuolin(Blueseope Construction Steel Siructure （Guangzhou） Co., Ltd., Guangzhou, Guangdong 510700, China)

机构地区：[1]博思格建筑钢结构(广州)有限公司,广东广州510700

出　　处：《中国建筑防水》2017年第15期15-17,共3页China Building Waterproofing

摘　　要：目前,国内金属围护结构主要有平板结构和金属压型板结构两大类。平板结构板面平直、边角交接易处理,但造价高;金属压型板结构抗弯能力较强,造价低,但存在边角交接难处理的问题。本文列举了几个常见的压型板边角处细部设计可能出现的问题,通过有效控制边角的相对位置,使压型钢板的边角交接和平板结构一样漂亮实用。Currently there are two main types of metal enclosing structures in China： flat panel and profiled panel. Flat panel structure has straight surface, the treatments of joints and comers are easy, but the cost is high; profiled metal panel has strong bending resistance and the cost is low, but it is difficult to handle the joints and comers. The article lists some common problems may happen with the joints and comers of profiled panel structure design. Through effective control of the relative position, the joint and corner connection of profiled panel can be the same beautiful and practical as flat panel structure.

关 键 词：金属维护结构 平板结构 金属压型板 边角细部处理 

分 类 号：TU39[建筑科学—结构工程]