SiO2杂化改性CPVC树脂的制备与表征  

Preparation and Characterization of SiO_2 Modified CPVC Resin by Hybridation

作　　者：宋永海 王大鹏[2] 吴凡[2] 章斯淇 梁东磊 宋秋生 

机构地区：[1]芜湖融汇化工有限公司,安徽芜湖241022 [2]合肥工业大学化学与化工学院,安徽合肥230009

出　　处：《塑料科技》2017年第8期35-38,共4页Plastics Science and Technology

摘　　要：以γ-氨丙基三乙氧基硅烷(KH550)和正硅酸乙酯(TEOS)为SiO_2前躯体,利用KH550和TEOS的原位溶胶-凝胶反应,制备SiO_2杂化改性氯化聚氯乙烯(CPVC)树脂。采用傅里叶变换红外光谱仪(FTIR)、X射线能谱仪(EDS)以及扫描电子显微镜(SEM)表征了改性CPVC的化学结构和微观形貌;并采用热失重分析仪(TGA)和差示扫描量热仪(DSC)对改性前后树脂的热性能进行了分析。结果表明:SiO_2与CPVC发生了杂化,且杂化后树脂的粒径减小;改性后CPVC树脂的耐热性能得到显著提高,分子链运动受到杂化网络限制,玻璃化转变温度和熔点均有所提高。Using γ-aminopropyltriethoxysilane（KH550） and tetraethylorthosilicate（TEOS） as precursors of SiO_2, SiO_2 modified CPVC resin was prepared via Sol-Gel reaction of KH550 and TEOS in the resin matrix. The chemical composition and micro-morphology of the modified CPVC resin was characterized by Fourier transform infrared spectroscopy（FTIR）, X-ray energy spectrometer（EDS） and scanning electron microscope（SEM）. Besides, their heat performance before and after modification were also investigated. The results indicate that, the hybridation between SiO_2 and CPVC has been carried out, the size of the resin decreases greatly after modification. The TGA curves and DSC curves show that, SiO_2 hybridation is helpful to modify the heat-resistance of CPVC resin, its glass transition temperature and melt point increase.

关 键 词：氯化聚氯乙烯 二氧化硅 Γ-氨丙基三乙氧基硅烷 杂化 耐热性能 

分 类 号：TQ325.3[化学工程—合成树脂塑料工业]