检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张晓桐[1] 张敬如[1] 裴士伦[1] 束冠 ZHANG Xiao-tong ZHANG Jing-ru PEI Shi-lun SHU Guan(Key Laboratory of Particle Acceleration Physics and Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China)
机构地区:[1]中国科学院高能物理研究所粒子加速物理与技术重点实验室,北京100049
出 处:《原子能科学技术》2017年第8期1515-1520,共6页Atomic Energy Science and Technology
基 金:国家自然科学基金资助项目(11275222)
摘 要:本文介绍了10MeV/100kW的高平均束流功率工业辐照加速器束流动力学模拟结果及其加速结构的优化设计结果。加速器采用驻波双周期轴耦合结构,1个加速腔和1个耦合腔构成1个加速单元,其工作频率为325 MHz,工作模式为π/2,加速腔和耦合腔之间通过耦合狭缝在轴向以磁耦合的方式耦合在一起。使用SUPERFISH优化加速腔的有效分路阻抗、Kilp系数等关键参数。束流动力学方面,使用PARMELA模拟论证在粒子源提供2.5keV、500mA的电子束后,通过6个加速腔可得到10 MeV/100kW的平均束流功率。加速腔优化完成后使用CST对耦合腔进行了设计,此时由6个加速单元组成的加速结构有效分路阻抗为23.9 MΩ/m、无载品质因数为29 347,各加速腔与相邻的耦合腔耦合系数为4.7%,工作模式与其相邻模式的最小频率间隔为2 MHz,每个加速单元功耗为290kW。An accelerating structure to obtain the average beam power of 10 MeV/100 kW for high average beam power industrial irradiation accelerator was developed.The results of beam dynamics studies and accelerating structure optimizations are as follows.The accelerator uses a bi-periodic standing wave on-axis coupling structure.An accelerating cavity and a coupling cavity form an accelerating structure unit.The operating frequency of the unit is 325 MHz atπ/2 mode.The coupling slots were used to couple the accelerating cavity and the coupling cavity together by magnetic coupling.The SUPERFISH code was used to optimize some key parameters like effective shut impedance and Kilp factor.The PARMELA code was used for beam dynamics studies.A 2.5 keV/500 mA electron beam was injected into an accelerating structure which consists of 6 accelerating cells to obtain the average beam power of 10 MeV/100 kW.The CST-MWS code was used to design the coupling cavity.The optimization results of the accelerator consisting of 6 accelerating structure units are that the effective shut impedance is 23.9 MΩ/m,the unloaded quality factor is 29 347,the coupling factor between every accelerating cavity and its adjacent coupling cavity is 4.7%,theπ/2 mode isolation bandwidth is 2 MHz,and the peak power loss is no more than 290 kW per unit.
分 类 号:TL53[核科学技术—核技术及应用]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.70