复合工况条件下刮板输送机运料中板磨损行为研究  

Wear Behaviors of Middle Pan of Armoured Face Conveyor under Composite Operating Conditions

作　　者：史志远[1,2] 朱真才[1] 

机构地区：[1]中国矿业大学机电工程学院,江苏徐州221116 [2]安标国家矿用产品安全标志中心,北京100013

出　　处：《摩擦学学报》2017年第4期472-478,共7页Tribology

基　　金：国家自然科学基金联合基金项目(U1510205)资助~~

摘　　要：针对实际工况、环境介质综合影响刮板输送机运料中板磨损行为的复杂问题,开展中板与煤、矸石、水等混合物料的磨损试验,利用统计学原理、交互作用技术和现代摩擦学理论对获得的试验数据进行研究与分析.结果表明:中板磨损量随接触压力、滑动速度的增加而增加;在接触压力、滑动速度一定的情况下,磨损量随水、煤、矸石中的水的比例升高而减少;中板的磨损形式主要为磨粒磨损、黏着磨损、腐蚀磨损和疲劳磨损,分布在磨损机制分布图的轻度、中度及重度破坏区内.Aiming at the complicated problems of the wear behavior of the armoured face conveyor in the actual working condition and the environment medium, the wear tests of middle pan against the mixture of the coal, gangue and water were carried out. Using the statistical principle, the interaction technology and the modern tribology theory,the experimental data were studied and analyzed. The results show that the wear increased with the increase of contact pressure and sliding speed. Under fixed contact pressure and sliding speed, the wear decreased with the increasing ratio of water in the mixture of water, coal and gangue; The wear mechanism of the plate were mainly abrasive wear in mild wear regime, adhesive wear and corrosion wear in moderate wear regime and fatigue wear in severe wear regime.

关 键 词：滑动摩擦 磨损试验 磨损规律 磨损机理 工作面输送机 

分 类 号：TH528[机械工程] TH227