椰糠培育叶菜种苗移植机械手设计与试验  

Design and experiment on manipulator for transplanting leaf vegetables seedling cultivated by coco-peat

作　　者：黎波[1] 辜松[1,2] 初麒[1] 吕亚军[1] 胡俊生[1] 谢忠坚 杨艳丽 江海宇 Li Bo Gu Song Chu Qi Lu Yajun Hu Junsheng Xie Zhongjian Yang Yanli Jiang Haiyu(College of Engineering, South China Agricultural University, Guangzhou 510642, China Key Laboratory of Key Technology on Agricultural Machine and Equipment, Ministry of Education, South China Agricultural University, Guangzhou 510642, China Guangzhou Sky Mechanical ＆ Electrical Technology Co., Ltd., Guangzhou 510642, China Guangzhou Liixiang Mechanical and Electrical Installation Engineering Co., Ltd., Guangzhou 511400, China)

机构地区：[1]华南农业大学工程学院,广州510642 [2]华南农业大学南方农业机械与装备关键技术教育部重点实验室,广州510642 [3]广州实凯机电科技有限公司,广州510642 [4]广州市绿翔机电安装工程有限公司,广州511400

出　　处：《农业工程学报》2017年第14期18-24,共7页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家重点研发计划项目(2017YFD0701504)

摘　　要：针对椰糠与泥炭相比容重小、孔隙度大、颗粒间黏附性弱,现有移植机械手对椰糠培育种苗移植适应性不佳的问题,该文以椰糠培育芥蓝种苗为移植对象,设计了一种4伸缩针式移植机械手,伸缩针直径2.5 mm、入土角76°。在移植机械手移植过程中,仅依靠基质块的基质散落质量百分比难以说明移植部件对种苗根系的影响,该文提出了一种基质散落质量百分比结合基质散落区域评分的综合评价法。针对50穴盘椰糠培育芥蓝种苗,通过伸缩针拾取试验,在保证椰糠基质块移植过程中保持完整条件下,确定了移植机械手伸缩针间距为36 mm;通过移植作业性能试验表明,叶菜种苗根系状态对移植成功率影响最大,机械手作业移动加速度也有一定影响,对最优组合分析后补做试验,试验结果表明对于正常长势椰糠培育芥蓝种苗根系状态,在根系分布率大于80%、垂直加速度0.3 m/s^2、水平加速度1.5 m/s^2和基质含水率81.01%条件下,芥蓝种苗移植成功率可达100%。该研究可为移植椰糠培育种苗的移植机开发提供技术参考。Currently, cultivated area of facilities horticulture is growing rapidly in China, while the level of mechanization is very low, and the production of hydroponic leafy vegetables during the seedlings transplanting is mainly manual. So it is needed to develop a plug tray seedlings transplanting machine which fits the mode of China＇s hydroponics leafy vegetables production. The main operation object of the ctLrrent transplanting machine in facilities horticulture is potted flowers that use different culture-substrate comparing with hydroponics leafy vegetables. In contrast, the production of hydroponics leafy vegetables uses coco-peat as the main culture-substrate in the South of China. Coco-peat has characteristics of small bulk density, large porosity, poor water-retention capacity, and poor adhesion between particles. Therefore, the existing facility horticultural transplanting manipulators are not suitable for such substrate. In view of the above problems, a 4-needle-type transplanting manipulator for hydroponics leafy vegetables for coco-peat substrate was designed in this paper. In the transplanting manipulator, we used a non-shrinkable needle structure that depended on the angle of the telescopic needle which can reduce the disturbance of the coco-peat as well as avoided the spallation of the substrate cube. In order to compare the adhesion characteristics between coco-peat and peat moss, a cube compression test has been done. The test results showed that coco-peat was more likely to be scattered than peat moss because the coco-peat has the characteristics of large porosity and difficulty forming adhesion between particles, and this trend was intensified with the increasing of substrate moisture content. The percentage of scattered substrate mass in the transplanting process and the remaining component on seedling root growth needed to be evaluated. As such, a comprehensive evaluation method that the percentage of scattered substrate mass combined with scored scattered area was proposed in this study. An e

关 键 词：农业机械 设计 试验 水培叶菜 种苗 移植机械手 椰糠基质 

分 类 号：S233.74[农业科学—农业机械化工程]