高光泽度聚丙烯的研究  

Research on High Gloss Polypropylene

作　　者：黄捷[1] 王波[1] 杨金明[1] 汤粤豫 田小艳[1] Huang Jie Wang Bo Yang Jinming Tang Yueyu Tian Xiaoyan(Shaanxi Research Design Institute of Petroleum and Chemical Industry, Xi＇ an, Shaanxi, 710054)

机构地区：[1]陕西省石油化工研究设计院,陕西西安710054

出　　处：《现代塑料加工应用》2017年第4期17-20,共4页Modern Plastics Processing and Applications

摘　　要：研究了成核剂、硫酸钡和偶联剂对聚丙烯(PP)性能的影响。采用正交试验,考察了润滑剂、降解剂、光亮剂和抗氧剂对PP光泽度的协同作用。结果表明:PP、硫酸钡、成核剂NX8000K、偶联剂、硬脂酸钙、降解剂、光亮剂、抗氧剂加入量分别为80.00,20.00,0.30,4.00,1.00,0.05,3.00,0.30份时,PP光泽度为最佳值(102°),达到了高光泽度的要求。The effects of nucleating agent, barium sulfate and coupling agent on properties of PP are discussed. The synergistic effects of lubricant,degradation agent,brightening agent and antioxidant on PP gloss are investigated by orthogonal design. The result shows that when PP, barium sulfate, nucleating agent NX8000K, coupling agent, calcium stearate, 0.30, （102°） 4. 00, degradation agent, brightening agent, antioxidant are added by 80.00,20.00, 1. 00,0.05, 3. 00,0. 30 phr respectively,PP surface gloss value is the best and reaches the requirements of high gloss.

关 键 词：聚丙烯 复合材料 高光泽度 正交试验 

分 类 号：TQ325.14[化学工程—合成树脂塑料工业]