显微组织对TA11钛合金棒材力学性能的影响  

Influence of microstructure on mechanical properties of titanium alloy TA11 bar

作　　者：郑念庆[1] 张永强 和永岗[1] 尚金金[1] 侯峰起[1] 赖运金[1] 

机构地区：[1]西部超导材料科技股份有限公司特种钛合金材料制备技术国家地方联合工程实验室,陕西西安710018 [2]中国航发商用航空发动机有限责任公司,上海201108

出　　处：《锻压技术》2017年第8期146-151,共6页Forging & Stamping Technology

基　　金：国家重点研发计划(2016YFB0701305);陕西省科技统筹创新工程计划(2016KTCQ01-100)

摘　　要：通过对TA11钛合金不同组织状态的棒材进行组织、性能检测分析,研究了初生α相含量和尺寸对TA11钛合金室温拉伸性能、热稳定性能、蠕变性能的影响。研究结果表明,初生α相含量对TA11钛合金的拉伸性能影响较小,但对合金的抗蠕变性能影响明显:初生α相含量在50%~90%范围内时,合金的室温拉伸性能、热稳定性能随初生α相含量的增加变化不明显,抗蠕变性能随初生α相含量的增加而提高;初生α相尺寸对TA11钛合金的拉伸性能、蠕变性能具有一定的影响,随着组织粗大程度的增加,拉伸强度降低,抗蠕变性能提高。The influences of the content and size of primary α-phase on tensile properties,thermal stability and creep properties of titanium alloy TA11 were investigated by analyzing microstructures and properties of titanium alloy TA11 in different tissues. The results show that the primary α-phase content has little effect on the tensile properties of titanium alloy TA11,but it has obvious effect on the creep properties of alloy. When the content of primary α-phase is within the range of 50%-90%,the tensile strength and thermal stability of the alloy at room temperature do not change significantly with the increase of the primary α-phase content,and the creep properties increase with the increase of the primary α-phase content. However,the primary α-phase size has a certain influence on the tensile properties and creep properties of titanium alloy TA11. With the increase of the coarse structure,the tensile strength decreases and the creep properties are improved.

关 键 词：TA11钛合金 钛合金棒材 显微组织 拉伸性能 热稳定性能 蠕变性能 

分 类 号：TG146.23[一般工业技术—材料科学与工程]