常化温度对CSP流程生产的2.5%Si硅钢析出物和磁性能影响  

Effects of Normalization Temperature on Precipitation and Magnetic Properties of Fe-2.5%Si Steel Produced by CSP

作　　者：施立发[1] 王立涛[1] 何志坚[1] 浦绍敏[1] SHI Li-fa WANG Li-tao HE Zhi-jian PU Shao-min(Maanshan Iron ＆ Steel Co., Ltd., Anhui Maanshan 243000, Chin)

机构地区：[1]马鞍山钢铁股份有限公司,安徽马鞍山243000

出　　处：《电工材料》2017年第4期12-15,共4页Electrical Engineering Materials

基　　金：国家"十五"科技攻关项目(2004BA318B)

摘　　要：本文研究了常化温度对硅含量2.5%的高牌号硅钢析出物和磁性能的影响规律。研究结果表明,随着常化温度在920~980℃范围内逐步提高,热轧态的析出物尺寸增大且分布密度降低,对应的再结晶退火态平均晶粒尺寸增大,磁性能P_(1.5/50)呈下降趋势,磁感呈上升趋势,且在退火温度为980℃时P_(1.5/50)达到2.50 W/kg最低值、磁感B_(50)达到1.705 T。Effects of normalization temperature on precipitation and magnetic properties of Fe-2.5%Si steel are investigated in this paper. The results show that normalization temperature at 920~980 ℃ can significantly change the magnetic properties and precipitation. With the increase of normalization temperature, the precipitation size of hot-rolling sheet is increased and distribution density of hot-rolling sheet precipitates is decreased. As well as, with the increase of normalization temperature, the average grain size of recrystallization annealing state is increased, and the iron loss and magnetic induction respectively are fall and rise, particularly the minimum iron loss P1.5/50 and maximum magnetic induction B50 respectively are 2.50 W/kg and 1.705 T at the normalization temperature 980 ℃.

关 键 词：硅钢 析出物 磁性能 常化 

分 类 号：TM275[一般工业技术—材料科学与工程]