3D生物打印的微结构促进小鼠表皮干细胞的增殖和活性  

Three-dimensional bioprinted microstructure promotes proliferation and viability of murine epithelial stem cells in vitro

作　　者：刘煜凡[1,2] 黄沙[3] 姚斌[4,5] 李曌[4] 李想[1,2] 付小兵[4] 吴旭[1,2] 

机构地区：[1]南方医科大学,广东广州510515 [2]南方医科大学南方医院胸外科,广东广州510515 [3]解放军总医院基础医学研究所,北京100853 [4]解放军总医院第一附属医院全军创伤修复与组织再生重点实验室暨皮肤损伤修复与组织再生北京市重点实验室,北京100048 [5]南开大学医学院,天津300071

出　　处：《南方医科大学学报》2017年第6期761-766,共6页Journal of Southern Medical University

基　　金：国家重点基础研究发展计划“973计划”(2012CB518105);国家自然科学基金(81121004,81671905)~~

摘　　要：目的探索不同构架的3D微结构对表皮干细胞增殖能力和细胞活性的影响并建立最佳3D生物打印模型。方法通过采用不同尺寸:210、340、420μm的打印喷头结合3D生物打印技术构建3种不同的含细胞3D微结构;利用荧光显微镜观察3D微结构中细胞形态及增殖现象;活/死细胞染色技术检测细胞活性;采用方差分析和样本t检验等方法进行统计学分析。结果 3种不同构架的3D微结构均可促进表皮干细胞增殖;打印后0、3、7 d之间,3组3D微结构在细胞活性水平上均逐步降低且差异有统计学意义(P<0.01);与7 d时的细胞活性相比,3组3D微结构在14 d时的细胞活性均升高且差异有统计学意义(P<0.01);与210μm组和340μm组相比,420μm组3D微结构在长期培养中细胞活性水平最高(P<0.01)。结论 420μm组3D微结构能够稳定促进皮肤替代物中表皮干细胞的增殖能力并维持高细胞活性,为构建3D生物打印组织工程表皮以及全层皮肤模型奠定了基础。Objective To evaluate the effect of different microstructures prepared by three-dimensional （3D） bioprinting on proliferation and viability of the murine epithelial stem cells in vitro. Methods 3D cell-laden microstructures were constructed using 3 different printing nozzles with diameters of 210, 340, and 420 μm. Fluorescence microscopy and the live/dead assay kit were used to observe the proliferation and viability of the murine epithelial stem cells in the microstructures. Results All the 3D cell-laden micro-structures were capable of promoting the proliferation of murine epithelial stem cells. In the 3 groups of micro-structures, the cell viability decreased significantly with time until 7 days after printing （P〈0.01）, but at 14 days after the printing, the cell viability increased significantly as compared with that at 7 days （P〈0.01）. The viability of the cells was significantly higher in the microstructure printed using a 420 μm nozzle than in the microstructures printed with 210 μm and 340 μm nozzles （P〈0.01）. Conclusion The microstructure printed with a 420 μm nozzle can stably promote the proliferation of murine epithelial stem cells and maintain a high level of cell viability, suggesting the feasibility of constructing tissue-engineered epidermis and full-thickness skin graft using 3D bioprinting technique.

关 键 词：3D生物打印技术 3D微结构 表皮干细胞 细胞增殖 细胞活性 

分 类 号：R318.08[医药卫生—生物医学工程] TP391.73[医药卫生—基础医学]