1Mn18Cr18N护环钢固溶强化研究  

Study on solid solution strengthening process of 1Mn18Cr18N retaining ring steel

作　　者：牛广斌[1] 芮守泰[1] 徐国涛[1] 张建国[1] 

机构地区：[1]天津重型装备工程研究有限公司,天津300457

出　　处：《锻压装备与制造技术》2017年第4期98-100,共3页China Metalforming Equipment & Manufacturing Technology

摘　　要：1Mn18Cr18N护环钢热处理过程中不发生相变,是单项奥氏体,所以锻造时产生的碳化物只能通过固溶处理进入奥氏体。利用小试样模拟试验,在1050℃进行固溶处理,通过三种不同冷却方式分析其对力学性能、组织、析出物的影响,得出在水冷(水循环良好)条件下的综合力学性能良好,兼具较低的屈服强度和较好的韧性。Since 1Mn18Cr18N retaining ring steeldoesn＇t have phase transformation during the heat treatment, which is single austenite, the carbide produced by forging can only go into austenite by solid solution treat- ment. By use of small sample simulation test,the solution treatment has been conducted at 1050℃three dif- ferent kinds of cooling way have been adopted to analyze its influence to mechanical performance, organiza- tion and precipitates. It is obtained that the comprehensive mechanical propertyis good under the condition of water cooling （when water cycle is good） with low yield strength and good toughness.

关 键 词：1Mn18Cr18N钢 护环 固溶处理 强化 

分 类 号：TG317[金属学及工艺—金属压力加工]