飞秒脉冲光谱测量对时域波形重建的影响  

Error Analysis for Femtosecond Optical Pulse Reconstruction from Spectrum Measurement with Spectral Phase Interferometry for Direct Electric-field Reconstruction

作　　者：邓玉强[1] 孙青[1] 吕亮[1] 吴志峰[1] 代彩红[1] 

机构地区：[1]中国计量科学研究院光学所,北京100029

出　　处：《计量学报》2017年第5期563-566,共4页Acta Metrologica Sinica

基　　金：国家自然科学基金(11274282);国家质量基础专项(2016YFF0200306);国家重大科学仪器开发专项(2016YFF0100505);国家科技支撑计划(2006BAF06B05);国家质量监督检验检疫总局质量技术监督能力提升专项(23-ANL1707);国家质量监督检验检疫总局公益性行业科研专项(201410025-02);上海市科学技术委员会科研计划项目(15DZ0500104)

摘　　要：利用光谱相位还原直接电场重建法对飞秒脉冲激光时域波形进行重建,分析了光谱测量波长示值误差和光谱辐照度示值误差对于飞秒脉冲光谱测量的影响。使用低压汞灯对光谱仪波长校准,根据校准结果,对测量光谱蓝移和红移,通过数值模拟研究波长示值误差对重建脉冲波形的影响;利用光谱辐射照度标准装置对光谱仪光谱辐照度校准,通过增加白噪声模拟分析和各种常用反射片实验测量研究光谱辐照度示值误差对重建脉冲波形的影响。结果表明,光谱测量波长示值误差和光谱辐照度示值误差对于飞秒脉冲光谱测量的相对标准差在1%之内。Based on the technique of spectral phase interferometry for direct electric-field reconstruction （ SPIDER）, the effects of spectrum measurement error on femtosecond optical pulses reconstruction are studied. Two types of spectrum measurement errors, wavelength error and spectral irradiance error, are investigated. A low-pressure mercury lamp was used as a natural standard to calibrate the wavelength of the spectrometer. According to the calibration error, the influence of the wavelength error for the reconstructed pulse waveform is studied by blue-shift and red-shift with numerical simulations. The spectral radiation standard was used to calibrate the spectral irradiance of the spectrometer. The influence of spectral irradiance is simulatedly studied by increasing white noise. The reflective spectra from various reflectors were also measured, and the reconstructed waveforms from the spectra was compared and analyzed. The simulated and experimental investigations show that the relative standard uncertainties from both the wavelength error and the spectral irradianee error are within 1%.

关 键 词：计量学 飞秒脉冲激光 光谱测量 时域波形测量 

分 类 号：TB96[机械工程—光学工程]