插铣不锈钢Cr13的铣削力建模分析  

Modeling and Analysis of Plunge Milling Force on Stainless Steel Cr13

作　　者：王宇[1] 曹宝宝[1] 于状 杨天旭 康学洋 

机构地区：[1]哈尔滨理工大学

出　　处：《工具技术》2017年第9期31-35,共5页Tool Engineering

基　　金：国家自然科学基金(51375127)

摘　　要：在瞬时刚性力模型的基础上搭建了插铣铣削力理论模型,通过加工不锈钢Cr13确定了模型方程中的铣削力系数。经MATLAB仿真并与切削试验结果对比,验证了该理论模型的可行性以及插铣Cr13的铣削力系数的准确性。Based on the theory of instantaneous rigid forces, the model of plunge milling forces is established. Through the plunge milling stainless steel Crl3 ,the coefficients of the force equations are found. By comparing the results from the MATLAB simulation with those from the cutting experiment,it is proved that the model is reliable and the coefficients are correct.

关 键 词：插铣 铣削力 不锈钢 建模 仿真 

分 类 号：TG506.71[金属学及工艺—金属切削加工及机床] TH161[机械工程—机械制造及自动化]