单片闭式波形弹簧加工工艺研究  

Study on machining technology of single-piece closed wave-shape spring

作　　者：牛晋波[1] 常涛[1] 李智军[1] 梁伟[1] 

机构地区：[1]西安航天动力研究所,陕西西安710100

出　　处：《火箭推进》2017年第4期70-75,共6页Journal of Rocket Propulsion

摘　　要：基于有限元ABAQUS软件平台对单片闭式波形弹簧进行了弯曲回弹数值仿真模拟与分析,研究了单片闭式波形弹簧母材厚度与冲压力和圆角处的回弹量与摩擦系数之间的关系,得出了冲压模具设计规范和波形弹簧加工工艺规范,采用该工艺规范制造的单片闭式波形弹簧已经用于无人机发动机之中,该发动机已通过地面试车考核,由此表明:单片闭式波形弹簧加工工艺是合理、正确和有效的。Based on the finite element ABAQUS software platform, the numerical simulation and analysis of the single-piece closed wave-shape spring are carried out. The relationship among thickness of spring material, punching force, friction coefficient and springback value at circular angle are studied. The design specifications of stamping die and processing technic specifications of wave-shape spring were obtained. The single-piece closed wave-shape spring manufactured with these specifications has been used in a kind of UAV engine. The engine has been passed the ground test. This shows that the processing technology of the single-piece closed wave-shape spring is reasonable, correct and effective.

关 键 词：波形弹簧 冲压成型 加工工艺 仿真分析 

分 类 号：V261-34[航空宇航科学与技术—航空宇航制造工程]