大动态范围增益可控固态放大器系统的实现  

Realization of Wide Dynamic Range Gain Controllable Solid State Amplifier System

作　　者：马福博 余振坤[1] 葛园园[1] MA Fubo YU Zhenkun GE Yuanyuan(Nanjing Research Institute of Electronics Technology, Nanjing 210039, China)

机构地区：[1]南京电子技术研究所,南京210039

出　　处：《现代雷达》2017年第8期71-74,共4页Modern Radar

摘　　要：针对雷达发射多波束的需求,研制了一套基于氮化镓高电子迁移率晶体管三代半导体器件的增益可控固态放大器系统。描述了系统中微波放大模块、幅相控制和相位补偿的实现方案,分析了功率放大器栅极电压与放大器增益和输出信号相位的关系。通过幅相控制电路实现发射通道输出信号幅度和相位快速转换,满足发射多波束的需求。经试验验证,研制的大动态范围增益可控固态放大器系统,提高了效率和工作带宽,解决了传统发射多波束系统中的问题。A gain controlled radio frequency amplifier system based on Ga N high electron mobility transistor of the third generation semiconductor device is developed,which is based on the demand of radar transmitting multi-beam. The system of microwave amplifier module,phase and amplitude control and phase compensation are described. The relationship between the power amplifier gate voltage of the amplifier gain and phase of output signal is analysed. The transmission channel amplitude and phase of rapid conversion through phase and amplitude control circuit is realized to meet the needs of transmit multi-beam. Experimental results show that this system can improve the efficiency and operating bandwidth and solve the problem of traditional transmit multi-beam system.

关 键 词：大动态范围 射频放大器 数字可控增益放大器 

分 类 号：TN722.33[电子电信—电路与系统]