二维层状材料原位电子辐照研究  

In-situ study of electron irradiation on two-dimensional layered materials

作　　者：徐涛[1,2] 尹奎波[1,2] 孙立涛[1,2,3] 

机构地区：[1]东南大学FEI纳皮米中心MEMS教育部重点实验室,南京210096 [2]东南大学-蒙纳什大学苏州联合研究院先进材料与制造中心,苏州215123 [3]东南大学-江南石墨烯研究院先进碳材料应用联合研发中心,常州213100

出　　处：《科学通报》2017年第25期2919-2930,共12页Chinese Science Bulletin

基　　金：国家自然科学基金(51420105003;61274114;11327901;61601116;11674052);国家杰出青年科学基金(11525415);江苏省自然科学基金(BK2012024)资助

摘　　要：纳米结构的高精度可控加工是制约器件小型化发展的重要限制因素之一,而基于透射电子显微镜的电子辐照有望在加工精度上推动纳米加工的进程.透射电子显微镜中高能电子束不仅能用于原子结构成像,还可用于原位辐照加工.因此,基于透射电子显微镜的电子辐照效应研究既有利于从原子尺度上探索材料在电子辐照作用下的结构稳定性及结构演变规律,又有利于加深对电子辐照过程的理解,为纳米结构的高精度可控加工提供理论依据和实验基础.本文将简要介绍几种常见的电子辐照效应,并综述近年来利用透射电子显微镜在石墨烯、氮化硼、过渡金属硫族化合物等二维层状材料原位辐照方面的研究进展,为进一步研究二维材料结构稳定性和精准、可控加工低维纳米结构提供参考.High precision fabrication of nanostructure is a primary limiting factor to devices miniaturization.Electron beam is expected to promote the process on the accuracy of fabrication.For instance,electron beam lithography has been developed to replace optical lithography to transfer patterns and has produced line width on the order of 10 nm or smaller.Furthermore,electrons can directly interact with the sample to cause changes in structure and properties,which is expected to be used for fabrication of specialized nanostructures with nanometer even sub-nanometer precision.Transmission electron microscopy（TEM） has become an indispensable tool for the study of the interaction between energetic electrons and sample.A large number of experimental studies have been carried out inside TEM where electron beam can not only be used for atomic resolution imaging but also for irradiation.These studies are conductive to understanding phenomena induced by irradiation in essence,which are the theoretical and experimental basis for controllable manipulation via electron irradiation.However,TEM images are parallel projections of three-dimensional（3D） structures onto the image plane,which tremendously increases the difficulty of atomic-structure analysis.Two-dimensional（2D） layered materials（graphene,hexagon boron nitride,transition metal dichalcogenides and so on） emerged and boomed in the past decade,which provide ideal systems to study electron irradiation effects on matter.As mono-or bi-atomic sheets,their atomic structures are accessible to image directly with atomic resolution in the advent of spherical aberration corrected TEM.The lateral resolution in TEM image,which is smaller than the bond length,leaves almost no room for uncertain interpretation.Meanwhile,the reconstruction of the lattice occurs in the 2D plane can be seen without any projection artifacts.Besides,structural changes,as they are generated under irradiation with energetic electrons,can be monitored in real time.On this basis,novel mechanisms o

关 键 词：二维材料 电子辐照 透射电子显微镜 结构演变 纳米加工 

分 类 号：TB383[一般工业技术—材料科学与工程]