轮胎模具预热温度分析及结构优化  

Preheating temperature analysis of tire mould and the structure optimization

作　　者：刘志兰 张伟 赵阳 王文广 魏猛 LIU Zhi-lan ZHANG Wei ZHAO Yang ZHANG Wei WANG Wen-guang WEI Meng(Himile Mechanical Science and Technology （Shandong） Co., Ltd, Gaomi, Shandong, 261500, China Key Laboratory of Tire Mould Key Technology in Shandong Province, Gaomi, Shandong, 261500, China Himile Mechanical Manufacturing （Shandong） Co., Ltd, Gaomi, Shandong, 261500, China)

机构地区：[1]山东豪迈机械科技股份有限公司,山东高密261500 [2]山东省轮胎模具关键技术重点实验室,山东高密261500 [3]山东豪迈机械制造有限公司,山东高密261500

出　　处：《模具工业》2017年第9期27-30,共4页Die & Mould Industry

摘　　要：探讨有限元分析在轮胎活络模具中的应用,通过有限元模拟分析轮胎硫化过程中的传热升温情况,对模具的结构进行优化,增加传热面积,缩小模具内部零件之间的间隙,提高轮胎硫化质量和效率。通过对模具结构进行优化,减少热量损失,提高轮胎硫化过程中蒸汽热量利用率,达到节能减排,绿色制造的目的。The appUcation of finite element analysis in segmented mould of tire was stud- ied, and the mould structure was optimized by the FEA simulation analysis of the heat transfer and temperature rise in the vulcanized process of the tire. Then the quality and ef- ficiency of the tire vulcanizion was improved by increased the area of heat transfer and re- duced the internal clearance of the mould. Finally the heat loss was reduced and the steam heat utilization in the vulcanizion process of the tire was increased.

关 键 词：轮胎 活络模具 热传递 有限元分析 结构优化 

分 类 号：TG76[金属学及工艺—刀具与模具]