流体动压超光滑加工关键工艺参数优化  被引量:5

Key process parameters optimization of hydrodynamic effect polishing

在线阅读下载全文

作  者:彭文强[1] 关朝亮[2] 胡旭东[1] 王卓[2] PENG Wenqiang GUAN Chaoliang HU Xudong WANG Zhuo(College of Basic Education, National University of Defense Technology, Changsha 410073, China College of Mechatronies Engineering and Automation, National University of Defense Technology, Changsha 410073, China)

机构地区:[1]国防科技大学指挥军官基础教育学院,湖南长沙410073 [2]国防科技大学机电工程与自动化学院,湖南长沙410073

出  处:《国防科技大学学报》2017年第4期179-184,共6页Journal of National University of Defense Technology

基  金:国家自然科学基金资助项目(61505259)

摘  要:流体动压超光滑加工材料去除主要受工件表面流体动压和剪切分布的影响,根据材料去除的理论模型分析了影响材料去除的关键工艺参数。基于流体动力学仿真和具体实验对抛光轮浸没深度、抛光轮转速和抛光轮间隙对流体动压超光滑加工的材料去除速率的影响规律进行了研究。分析结果表明:抛光轮的浸没深度对材料去除速率影响不大;材料去除速率随着抛光轮转速的减小、抛光间隙的增大而减小;考虑实际使用条件,最优抛光轮转速为300 r/min、抛光间隙为25μm、抛光轮浸没深度为(2/3)R。同时对抛光头温度稳定性进行了具体实验测试,其在装置启动后4 h基本达到热平衡,通过试运行预热的方式可有效避免温升变化对抛光间隙的影响。The material removal rate of HEP( hydrodynamic effect polishing) was mainly affected by the distribution of hydrodynamic pressure and shear stress on the workpiece surface,and the key process parameters were sought out accordingly. Based on the fluid dynamic simulation and experiment exploration,it investigated in detail how the material removal rate was affected by the wheel immersed depth,the wheel rotated speed and the polishing clearance. The analysis results show that the wheel immersed depth has little effect on the removal rate while the removal rate decreases along with the reduction of the speed and the increase of the polishing clearance. Considering the practical process condition,the optimal wheel immersed depth,speed and polishing clearance are( 2/3) R,300 r/min and 25 μm respectively. Meanwhile,the temperature stability of the polishing head was monitored,and it reached thermal equilibrium within 4 hours at start of the device. Therefore the stability of polishing clearance affected by the temperature can be guaranteed by idling with preheating section.

关 键 词:流体动压超光滑加工 工艺参数 材料去除速率 稳定性 

分 类 号:TH161[机械工程—机械制造及自动化]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象