误差抵消法在线缆连续退火装置中的应用  

The application of error compensation in continuous wire annealing

作　　者：伍世荣[1] 

机构地区：[1]桂林电子工业学院,广西桂林541004

出　　处：《电线电缆》2002年第4期40-41,共2页Wire & Cable

摘　　要：拉丝退火连续生产线要保证退火导线的质量 ,必须使线材退火均匀一致 ,这就要求拉丝和退火两过程能稳定地进行 ,除了保证两者间严格同步外 ,还要求线材退火过程中走丝平稳 ,以保证大电流均匀导入 ,不打火、不断丝。为此 ,作为退火装置最主要部件的接触轮 ,其回转精度要求较高。该文介绍了如何采用误差抵消法来提高回转的精度 ,以及退火导线的质量。In the continuous wire drawing and annealing lines, the wires must be annealed evenly in order to ensure good quality of annealed wires. This can only be realized by steady wire drawing and annealing processes. The two processes should be in strict synchronization. Besides, the wires should run smoothly during annealing so that large current may evenly fed in without electric spark and wire break. For this reason, the contact pulley, the most important component of the annealing, shall have a high precision rotation. This paper demonstrate how to increase the rotation precision of the pulley by error compensation method so as to raise the quality of the annealed wires.

关 键 词：误差抵消法 在线缆连续退火装置 裸电线 接触轮 回转精度 

分 类 号：TM244[一般工业技术—材料科学与工程]