基于Matlab和TCA的螺旋锥齿轮小轮控制参数优化  

Control Parameters Optimization of the Pinion in Hypoid Bevel Gear Pair Based on Matlab and TCA

作　　者：杨林[1] 刘大鹏 

机构地区：[1]沈阳工业大学机械工程学院,沈阳110870

出　　处：《机械工程师》2017年第11期21-24,共4页Mechanical Engineer

摘　　要：为进行螺旋锥齿轮的小轮控制参数的优化,以大轮的齿面方程为例,进行了TCA(Tooth Contact Analysis)的数学模型的建立。依据所建模型,并利用Matlab进行了参数优化程序的编写。通过对小齿轮控制参数的不断调整,最终使实际接触区域和传动误差达到较为理想的状态。最终结果表明,文中所采用的方法可以很好地实现小轮控制参数方面的优化。To further optimize control parameters of the pinion in hypoid bevel gearpair,the mathematical model of tooth contact analysis （TCA） is established based on theoretical tooth surface equation of the large gear in this paper. Based on this model, the solution of parameters is written using Matlab software. The expected results of both tooth surface contact area and driving error can be achieved by continuously adjusting the initial values in the program. Results show that the method is effective in teams of optimization of control parameters of the pinion.

关 键 词：TCA 小轮控制参数 齿面方程 

分 类 号：TH164[机械工程—机械制造及自动化] TH132.41