铣削力预测模型建立及试验验证  

Establishment and Test Verification of Milling Force Prediction Model

作　　者：张豪[1] 曾庆锋 田燕斌 程浩 

机构地区：[1]浙江省机械工业情报研究所,浙江杭州310009 [2]浙江省机械工业联合会,浙江杭州310009 [3]石家庄海山实业发展总公司,河北石家庄050208

出　　处：《机电工程技术》2017年第9期44-47,共4页Mechanical & Electrical Engineering Technology

摘　　要：目前部分学者对铝合金切削力进行了研究,主要从单因素或三因素入手。但是由于只考虑一个变量,忽略了其它变量,实验结果容易失真,而三因素方法主要是用来研究车削的力学特征。采用四个因素实验法对铣削力模型进行分析,建立了平均铣削力公式,为其他相关的试验研究提供理论参考。At present, some scholars have studied the cutting force of aluminum alloy, mainly from single factor or three factors. However, due to only one variable, ignoring the other variables, the experimental results are easy to distort, and the three factor method is mainly used to study the meehanieal characteristics of turning. In this paper, the milling force model is analyzed by four factor experiments, and the average milling force formula is established.

关 键 词：铣削力 有限元分析 铣削加工 

分 类 号：TG54[金属学及工艺—金属切削加工及机床]