镀锌对Q460高强钢管轴压承载力影响的试验研究  

EXPERIMENTAL RESEARCH ON EFFECT OF BEARING CAPACITY OF GALVANIZED Q460 HIGH STRENGTH STEEL TUBE UNDER AXIAL COMPRESSION

作　　者：蔡新未 王庭华 黄峥 张大长[3] 谈磊 CAI Xinwei WANG Tinghua HUANG Zheng ZHANG Dachang TAN Lei(School of Physical and Mathematical Sciences, Nanjing University of Technology, Nanjing 211800, China Design Center of State Grid Jiangsu Economics Research Institute, Nanjing 211800, China College of Civil Engineering, Nanjing University of Technology, Nanjing 211800, China China Energy Engineering Group Jiangsu Power Design Institute Co. Ltd, Nanjing 211102, China)

机构地区：[1]南京工业大学数理科学学院,南京211800 [2]江苏省电力公司经济技术研究院设计中心,南京211800 [3]南京工业大学土木工程学院,南京211800 [4]中国能源建设集团江苏省电力设计院有限公司电网工程公司,南京211102

出　　处：《钢结构》2017年第9期13-16,共4页Steel Construction

基　　金：国家自然科学基金项目(51678293);国网公司2016年依托工程基建新技术研究项目

摘　　要：随着输电线路电压等级的不断提高,杆塔结构荷载越来越大,高强钢以其强度高等特点在特高压输电钢管塔中得到了较为广泛的应用。然而,目前国内对Q460高强钢管承载力特性的相关研究较为匮乏,更没有涉及到镀锌Q460高强钢管。针对12组不镀锌Q460高强钢管及6组镀锌Q460高强钢管试件开展轴压试验,研究Q460高强钢管的承载力及变形特性,分析镀锌对高强钢承载力特性的影响规律。结果表明:Q460高强钢管的承载力比我国相关规范中对应设计值高20%以上;镀锌对钢管的稳定承载力有明显的提高作用。With the increase of the transmission line voltage level,the load of the tower structure is getting bigger and bigger.High strength steel has been widely used in the UHV transmission steel tower.However,the current domestic researches on the bearing capacity characteristics of Q460 high strength steel tube are scarce and not related to galvanized Q460 high strength steel tube.The axial compression experiment research on 12 different non-galvanized Q460 steel tubes and 6 different galvanized Q460 steel was conducted.The purpose of the experiment was to study the bearing capacity and deformation characteristics of Q460 high strength steel tube.The influence on the bearing capacity of galvanized high strength steel was analyzed.The results showed that Q460 steel tubes had 20% higher strength than corresponding design allowable values in domestic codes;galvanizing could obviously increase the stable bearing capacity of the Q460 steel tubes.

关 键 词：Q460高强钢 镀锌 稳定承载力 轴压试验 

分 类 号：TM753[电气工程—电力系统及自动化]