检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:沈才华[1,2] 王媛[1,2] 李鹤文 胡玉田[2] SHEN Cai-hua WANG Yuanl, LI He-wen HU Yu-tian(Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, Hohai University, Nanjing, Jiangsu 210098, China College of Civil and Transportation Engineering, Hohai University, Nanjing, Jiangsu 210098, China)
机构地区:[1]河海大学岩土力学与堤坝工程教育部重点实验室,江苏南京210098 [2]河海大学土木与交通学院,江苏南京210098
出 处:《岩土力学》2017年第10期2873-2880,共8页Rock and Soil Mechanics
基 金:江苏省自然科学基金面上项目(No.BK20141419);国家博士后基金(No.2015M571656);浙江省交通运输厅科技计划重点项目(No.2015J09);中央高校基本科研业务费专项资金(No.2015B25914);广东省交通运输厅科技支撑项目(No.201302023)~~
摘 要:基于圆孔扩孔理论,考虑挤密砂桩挤密过程中砂桩本身的挤密体积变化,建立了砂桩桩身压缩模量的计算方法。采用Mohr-Coulomb屈服准则计算桩周土屈服区范围,同时结合桩间土的e-p曲线压缩理论,提出了基于扩孔理论的桩周土平均压缩模量计算公式,从而提出了考虑埋深影响的分层桩土应力比计算方法。结合越南河内-海防高速公路实际工程进行了计算分析,随着套管直径增大(0.5~0.6 m),挤密砂桩和桩周土的压缩模量都变小,但平均桩土应力比增大,从2.56增大至2.72,这符合《复合地基技术规范》中对于无实测资料时,桩间土强度低时桩土应力比取大值,桩间土强度高时取小值的规定。桩土应力比理论计算结果处于规范建议取值2~3之间。说明理论方法合理可靠,从而提高了挤密砂桩设计的科学性。Based on cavity expansion theory, a method for calculating compression modulus of sand compaction pile is developed by considering the change of sand pile volume in the compaction process. The yield zone of the soil around the pile is calculated by Mohr-Coulomb yield criterion. Using the e-p soil compression curve, a formula for average compression modulus is deduced. A method considering the influence of buried depth is proposed for calculating pile-soil stress ratio of sand compaction pile. The Honai-Haiphong highway project in Vietnam is selected as a case study. Analysis indicates that as the casing pipe diameter increases from 0.5 m to 0.6 m, the compression modulus of sand compaction piles and soil around pile decrease, and the average pile-soil stress ratio increases from 2.56 to 2.72. This confirms the statement in Technical Code for Composite Foundation that the pile-soil stress ratio adopts the low value for the soil around pile with high strength, or vice versa. The theoretical calculation result of the pile-soil stress ratio is between 2 and 3 suggested by specification, demonstrating the theoretical method is reasonable and reliable, and greatly improves the sand compaction pile design.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.171