铟对低银Ag-Cu-Zn钎料显微组织和性能的影响  

Influences of In on the Microstructure and Mechanical Properties of Low Silver Ag-Cu-Zn Filler Metal

作　　者：马超力 薛松柏[1] 张涛[1] 蒋俊懿 龙伟民[3] 张冠星[3] 张青科[3] 何鹏[4] Ma Chaoli Xue Songbai Zhang Tao Jiang Junyi Long Weimin Zhang Guanxing Zhang Qingke He Peng(Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China Jinhua Shuanghuan Brazing Alloys Co., Ltd, Jinhua 321000, China State Key Laboratory of Advanced Brazing Filler Metals ＆ Technology, Zhengzhou Research Institute of Mechanical Engineering, Zhengzhou 450001, China State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China)

机构地区：[1]南京航空航天大学,江苏南京210016 [2]金华市双环钎焊材料有限公司,浙江金华321000 [3]郑州机械研究所新型钎焊材料与技术国家重点实验室,河南郑州450001 [4]哈尔滨工业大学先进焊接与连接国家重点实验室,黑龙江哈尔滨150001

出　　处：《稀有金属材料与工程》2017年第9期2565-2570,共6页Rare Metal Materials and Engineering

基　　金：中央高校基本科研业务费专项基金资助项目;江苏高校优势学科建设工程资助项目

摘　　要：研究了低银Ag-Cu-Zn钎料(ωAg≤20%)的熔化特性、铺展性能、钎料显微组织。以黄铜/304不锈钢作为母材,采用火焰钎焊方法,进行了搭接钎焊试验。结果表明,低银Ag-Cu-Zn钎料显微组织主要由铜基固溶体、银基固溶体、Cu Zn化合物相构成。In的添加降低了Ag-Cu-Zn钎料的固、液相线温度,改善了钎料润湿性能;添加In的低银Ag-Cu-Zn钎料在凝固过程中析出富In的银基固溶体,起到了固溶强化的效果,改善了钎焊接头的显微组织,从而提高了钎缝接头的力学性能。使用17Ag Cu Zn-1In火焰钎焊黄铜/304不锈钢,钎焊接头成形美观、组织致密、无缺陷存在,综合性能与含银量为25%的BAg25Cu Zn Sn银钎料的性能相当,节银效果显著。Novel low silver based filler metals were developed used for brazing brass and 304 stainless steel. The microstructure of the low silver based filler metals was observed by scanning electron microscopy（SEM） and the wettability was also analyzed. The mechanical properties of lap joint were tested. The brass and stainless steel were brazed with flame method. The results indicate that the microstructure of the metal is composed of Cu base solid solution,Ag base solid solution and CuZn compound. In addition decreases the solidus and liquidus temperatures and improves the wettability of the low silver based filler metals. The tensile strength of joints increases with the addition of indium due to the solution strength effect. The joint of brass and 304 stainless steel by 17 AgCuZn-1 In exhibits good appearance and dense microstructure with no defects,and its performance is comparable with that of the joint brazed with the B25 AgCuZnSn filler metal,suggesting a significant Ag-saving effect.

关 键 词：低银钎料 熔化特性 金相组织 力学性能 

分 类 号：TG425[金属学及工艺—焊接]