工艺参数对松子壳-杨木刨花复合板握钉力的影响  

Effects of Process Parameters on Nail-holding Ability of the Pine Nut Shell/Poplarflakes Composite Board

作　　者：张晶[1] 崔立东[1] 王春霞[1] ZHANG Jing(Heilongjiang Wood Science Research Institute, Harbin 150081)

机构地区：[1]黑龙江省木材科学研究所国家林业局制材研究实验室省木材综合利用重点实验室,哈尔滨150081

出　　处：《林业科技》2017年第5期48-50,共3页Forestry Science & Technology

基　　金：黑龙江省财政自拟课题(HCZ201302)

摘　　要：采用正交设计,以松子壳和杨木刨花为主要原料制备复合板,并对其进行握钉力的测试,探讨工艺参数对复合板握钉力的影响。结果表明,当杨木刨花与松子壳的原料比例为50∶50、施胶量为5%、热压温度190℃、热压时间为20 min时,可获得握钉力良好的松子壳-杨木刨花复合板。Based on orthogonal design method,the paper used pine nut shell and Poplarflakes as raw materials for the nail-holding ability of the composite board,and reached the effects of process parameters on nail-holding ability.The optimal pine nut shell/Poplarflakes composite hoard could be obtained when proportion of the aspen shavings and pine nut shell is 5 0： 50, resin charge blended was 5%, hot-pressing temperature was 190℃, hot-pressing time was 20 rain.

关 键 词：松子壳 杨木刨花 复合板 工艺参数 握钉力 

分 类 号：S781.64[农业科学—木材科学与技术] TS653.5[农业科学—林学]