基于小型单极加速器质谱测量^(14)C的样品制备技术研究  

^(14)C Sample Preparation for Compact Single Stage AMS

作　　者：庞义俊 何明[1] 杨旭冉[1] 沈洪涛[2] 赵庆章[1] 张慧[1,3] 王小明[1] 杨宪林 姜山[1] 

机构地区：[1]中国原子能科学研究院核物理研究所,北京102413 [2]广西师范大学物理科学与技术学院,广西桂林541004 [3]黑龙江省科学院技术物理研究所,黑龙江哈尔滨150086

出　　处：《原子能科学技术》2017年第10期1866-1873,共8页Atomic Energy Science and Technology

基　　金：国家自然科学基金资助项目(11375272;11575296;11565008);北京市科委重大项目资助(D15110000501502)

摘　　要：为满足新研发的200kV单极静电加速器质谱仪测量14 C的需要,开展了14 C样品制备技术研究。在自主设计的14C制样装置上优化了H2-Fe法、Zn-Fe法、Zn-H-Fe法制备石墨样品的实验条件,制备的样品经离子源引出12C-的束流均可达15~40μA,稳定性好于0.2%。在加速器质谱仪的调试中发现压低制备样品12CH+13C和12C的粒子个数比更有利于实现14 C-SE-AMS小型化及高灵敏测量。^(14)C-SE-AMS的测试样品中碳含量小于1mg时,采用Zn-Fe法有利于压低^(12)CH+^(13)C和^(12)C的粒子个数比;样品碳含量为1~5mg时,采用Zn-Fe法和Zn-H-Fe法效果相当。建立的制样方法对含碳量为100μg^5mg的样品,其产率均能达到95%以上,且空白样品测试结果表明此系统能有效避免样品制备中的交叉污染。In order to satisfy 14^C measurement with the new developed 200 kV stage electrostatic accelerator mass spectrometer, the samp 14C were investigated. The graphitization experimental cond Zn-H-Fe methods w beam current of 12^C ter than 0.2%. Th ere e optimized on self-designed 14^C s r all prepared samples can reach C measurement shows that the e preparation process single es for for H2-Fe, Zn-Fe and ample preparation system. The 15 40μA and its stability is bet- lower particle number ratio of 12^CH＋13^C and 12^C benefits the high sensitivity and miniaturization of device. The result also shows that the Zn-Fe method can depress the particle number ratio of 12^CH＋13^C and 14^C for the samples with the carbon content less than 1 mg, while, for the carbon content among 1 mg to 5 mg, the Zn-Fe and Zn-H-Fe methods have the equivalent effect. For above preparation methods, the yield of carbon can reach more than 95% for the carbon content of 100μg-5 mg. Moreover, through blank sample measurement it is proved that the cross contamination during the sample preparation can be avoided.

关 键 词：14^C 样品制备 加速器质谱 

分 类 号：O571.1[理学—粒子物理与原子核物理]