基于质量弹簧模型的阻尼复合材料  

Damping composite materials based on mass spring model

作　　者：崔向红[1] 刘晓东[1] 李天智[1] 姜海健[1] 苏桂明[1] 方雪[1] 陈明月[1] 宋美慧[1] 张晓臣[1] 

机构地区：[1]黑龙江省科学院高技术研究院.黑龙江哈尔滨150020

出　　处：《化学工程师》2017年第10期1-3,7,共4页Chemical Engineer

基　　金：黑龙江省科学院科学研究基金项目(XKJJ1601)

摘　　要：利用聚氨酯(PU)/环氧EP互穿网络聚合物,引入质量弹簧模型,利用质量块与鳞片纤维的协同作用制备了高阻尼、宽温域阻尼复合材料,考察表面修饰后的质量块在基体中的分散情况及其对阻尼复合材料动态力学性能的影响。利用扫描电镜(SEM)、动态力学热分析仪(DMA)对该阻尼复合材料的结构和阻尼性能进行了研究。结果表明,作为质量弹簧模型中的质量块的加入和其存在的形态对复合材料的阻尼性能有很大的影响,加入表面修饰后的质量块,阻尼复合材料损耗因子为0.4的阻尼温域达到80℃。A kind of high damping, wide temperature range damping composite material was prepared by using polyurethane （PU）/EP epoxy interpenetrating polymer network with mass spring model, and synergistic reaction of mass and synergy of flake fiber.The quality of the piece after surface modification on the dispersion in the matrix and its effect on damping dynamic mechanical properties of composite materials was studied by using scanning electron microscopy （SEM）, dynamic mechanical thermal analyzer （DMA）. The damping structure and damping properties of the composites were studied. Results show that as the quality of the mass spring model, its existing form of the damping properties of the composite material has a great influence,damping composite.The damping temperature range reached 80℃ when lossing factor is 0.4.

关 键 词：质量弹簧模型 阻尼复合材料 动态热力学性能 

分 类 号：TB332[一般工业技术—材料科学与工程]