基于MATLAB/Simulink异步电机矢量控制系统C代码生成  

C Code Generation of Vector Control System of Asynchronous Motor Based on MATLAB/Simulink

作　　者：曾宇航 郭鸿武[1] ZENG Yu-hang GUO Hong-wu(College of Mechatronic Engineering and Automation, National University of Defense Technology, Changsha 410073 China)

机构地区：[1]国防科技大学机电工程与自动化学院,湖南长沙410073

出　　处：《自动化技术与应用》2017年第10期112-116,134,共6页Techniques of Automation and Applications

摘　　要：随着工业技术的发展,异步电机控制系统的开发流程要求更低的成本和更短的周期,而MATLAB配合TI系列DSP正好为此提供了一个开发平台。本文提出的控制系统开发流程首先通过构建异步电机控制系统仿真模型获得所需控制参数;之后根据所获取的控制参数和外部硬件结构,构建控制系统代码生成模型,生成所需的DSP可执行C代码;最后将生成的可执行代码下载到以TI系列DSP为控制核心的硬件控制系统中进行硬件实验,矫正模型参数并验证生成代码的正确性。With the development of industrial technology, the development process of the control system of asynchronous motor requires a lower cost and shorter cycle, while the MATLAB with TI series DSPjust provides a development platform for it. This paper proposes a control system development process which firstly obtains the required parameters by building asynchronous motor control system simulation model. Then generates the code system through the control parameters which obtained, and generates the DSP executable code. Finally downloads the executable code to the hardware control system to do the experiments. Next corrects the model parameters and verifies the correctness of the code.

关 键 词：代码生成 矢量控制系统 MATLAB DSP 

分 类 号：TP206[自动化与计算机技术—检测技术与自动化装置]