金刚石制品热压烧结机电极结构优化研究  

Structure Optimization for the Electrode of Diamond Products Sintering Machine

作　　者：张三川[1] 寇华鹏 海小平 

机构地区：[1]郑州大学机械工程学院,河南郑州450001 [2]郑州金海威科技实业有限公司,河南郑州450001

出　　处：《机械设计与制造》2017年第11期40-43,48,共5页Machinery Design & Manufacture

摘　　要：为了解决金刚石制品热压烧结机能耗过大与铜电极烧损等问题,对某型热压烧结机进行了实际能耗测试测量实验,确定了热压烧结机的能耗分布以及烧结体的温度场分布。根据实验结果,设计了一种新型薄层隔热导电复合节能构件。利用ANSYS软件分析了该构件对铜电极温度场的影响,仿真结果表明:增加复合构件后,铜电极的平均温度由66.04℃降低为59.79℃,降低了热压烧结机能耗;最高温度从85.9℃降低为76.5℃,可以消除铜电极烧损发生,达到了节能优化设计目标。To solve the problems of the excessive power consumption of the hot-pressing Sintering machine as well as the burn out of the copper electrode, a number of energy measurement experiments are conducted based on a hot pressing Sintering machine. The experiments find out the energy distributions of the machine and the temperature field of the Sintered body. A new kind of energy-saving electrical-conductive and adiabatic thin compound component is designed based on the experiment results. Simulation results show that： After stalling the component, the average temperature of copper electrode from 66.04℃ reduced to 59.79℃, reduced energy consumption of the Sintering machine. The maximum temperature of copper electrode reduced from 85.9℃ to 76.5℃, avoiding the burn out of copper electrode, achieve the goal of energy saving.

关 键 词：热压烧结机 能耗分析 结构优化设计 金刚石制品 

分 类 号：TH16[机械工程—机械制造及自动化] TK175[动力工程及工程热物理—热能工程]