基于CDCTA和MOCCII的低功耗电流模式n阶滤波器  

A Low Power Current Mode nth-Order Filter Based on CDCTA and MOCCII

作　　者：王春霞[1] 司国斌[1] 郭亚涛 WANG Chunxia SI Guobin GUO Yatao(School of Mechanic and Electric Engineering, Jiaozuo University, Jiaozuo, Henan 454003, P. R. China StateGrid Wenxian Electric Power Co. Ltd. , Jiaozuo, Henan 454003, P. R. China)

机构地区：[1]焦作大学机电工程学院,河南焦作454003 [2]中国国家电网温县供电有限责任公司,河南焦作454003

出　　处：《微电子学》2017年第5期625-629,共5页Microelectronics

基　　金：河南省科技攻关项目(152102210204;152102210020)

摘　　要：提出了一种电流模式多输入单输出的n阶滤波器。该电路包括一个电流差分级联跨导放大器(CDCTA)、一个多输出第二代电流传输器(MOCCII)和若干接地电容。无需改变电路内部的结构和器件数目,仅通过选择合适的输入电流信号就可实现任意阶的高通、低通、带通、带阻等滤波功能。该滤波器结构简单,输出阻抗高,易于集成,频带宽,功耗低,滤波性能优越。基于TSMC0.18μm CMOS工艺,采用Pspice对电路进行了仿真,结果证明了该滤波器理论分析的正确性。A novel multiple-input single-output current mode nth-order multifunction filter circuit was proposed.It was composed of one current differencing cascaded transconductance amplifier（CDCTA）,one multiple-output second-generation current conveyor（MOCCII）and several grounded capacitors.By properly selecting the input terminals,all the standard filter functions,such as nth-order high-pass（HP）,low-pass（LP）,band-pass（BP）and band-stop（BS）,were implemented simultaneously without changing the circuit＇s internal structure and the numbers of devices.The proposed filter featured simple circuit structure,high output impedance,easy integration,high frequency bandwidth and low power.It had a good filtering performance.It was simulated by PSpice in the TSMC 0.18μm CMOS technology.The results had verified the theoretical analysis for the proposed filter.

关 键 词：电流模式 N阶滤波器 CDCTA MOCCII 模拟集成电路 

分 类 号：TN713.1[电子电信—电路与系统] TN432