气固法氯磺化聚乙烯在冶金胶辊包覆胶中的应用  

Application of Chlorosulfonated Polyethylene by Gas-Solid Phase Method in Rubber Covering Compound for Metallurgy Rubber Roller

作　　者：李长顺 孙洪良 谢忠麟[2] LI Changshun SUN Hongliang XIE Zhonglin(Hebei Chunfeng Yinxing Rubber Roller Co. ,Ltd,Jizhou 053200, China Beijing Research and Design Institute of Rubber Industry, Beijing 100143, China)

机构地区：[1]河北春风银星胶辊有限公司,河北冀州053200 [2]北京橡胶工业研究设计院,北京100143

出　　处：《橡胶工业》2017年第10期611-614,共4页China Rubber Industry

摘　　要：研究气固法氯磺化聚乙烯(CSM)3570在冶金胶辊包覆胶配方中的应用,并与溶液法CSM(海帕龙40)进行对比。结果表明:气固法CSM3570红外光谱的特征吸收峰的位置与海帕龙40一致;在冶金胶辊包覆胶配方(CSM 100,炭黑70,环氧大豆油15,粘合增进剂3,加工助剂2,其他助剂2,防老剂3,助交联剂PDM 1,环氧树脂E-5120,促进剂3.5,合计219.5)中以CSM3570等量替代海帕龙40,胶料的综合性能比较相近,均符合相关标准要求,且可以顺利完成胶辊生产的各个工序。The application of chlorosulfonated polyethylene（CSM）3570 produced by gas-solid phase method in the rubber covering compound for metallurgy rubber roller was studied and compared with chlorosulfonated polyethylene（Hypalon 40）which was manufactured by solution method. The test results showed that,the positions of characteristic absorption peaks of the infrared spectrum of CSM 3570 and Hypalon 40 were basically the same. The formula of rubber covering compound for metallurgy rubber roller was as follows：CSM 100,carbon black 70,epoxy soybean oil 15,adhesion promoter 3,processing aid 2,other additive 2,antioxidant 3,crosslinking agent PDM 1,epoxy resin（E-51） 20,accelerator 3. 5,and the total was 219. 5. The properties of the compound with CSM3570 were close to the properties of the compound with Hypalon 40. The properties of both compounds met the requirements of corresponding standard and production process of the roller.

关 键 词：氯磺化聚乙烯 气固法 溶液法 冶金胶辊 包覆胶 

分 类 号：TG333[金属学及工艺—金属压力加工] TQ333.92[化学工程—橡胶工业]