基于STC12C5608AD的高精度激光雕刻平台控制系统的设计  

Design of High-precision Laser Engraving Platform Control System Based on STC12C5608AD

作　　者：韩团军[1] 

机构地区：[1]陕西理工大学物理与电信工程学院,陕西汉中723000

出　　处：《机床与液压》2017年第20期126-129,共4页Machine Tool & Hydraulics

基　　金：陕西省教育厅基金项目(16JK1151);院士工作站资助项目(fckt201503);陕西省教育厅产业化培育项目(14JF004);陕西理工学院2015年科研基金项目(SLGKY15-25);陕西理工大学2017年科研基金项目(SL-GKY2017-16)

摘　　要：为了提高激光雕刻系统的精度,提出一种基于STC12C5608AD的高精度激光雕刻平台控制系统。以STC12C5608AD为系统的主控制器,采用带转换器的微步进驱动芯片A3967SLB作为步进电机的驱动器,两组电机运行状态依靠不同频率的PWM控制驱动器来实现步进电机细分控制。通过系统控制,系统可以在X向和Y向精确自动移动进行雕刻设计,根据电机的圈数,通过一定的数据分析处理可以计算出滑台的实时位移量,并反馈给控制器由显示设备输出。实验结果证明:该激光雕刻控制系统运行平稳,精度较高,可达0.01 mm以上,有一定的实际应用价值。To improve the accuracy of the laser engraving system, a high-precision laser engraving control system was presented based on STC12C5608AD. STC12C5608AD was the master controller of the system, the micro-stepping drive chip A3967SLB with con- verter was stepper motor drive. Two motor running was relied on a different frequency PWM controller to realize stepper motor subdivi- sion control. Through the control system, the system could accurately and automatically move in the X-axis and Y-axis to make sculp- tured design. According to the number of turns of the motor, through a certain data analysis, the displacement of the slide could be cal- culated real-time, and it was fed back to the controller output by the display device. Experimental results show that the laser engraving control system runs smoothly, has high precision accuracy up to 0.01 mm. It has certain practical value.

关 键 词：雕刻系统 步进电机 驱动芯片 PWM控制 

分 类 号：TP273[自动化与计算机技术—检测技术与自动化装置]