500kA铝电解多功能起重机关键部件的分析优化  

Analysis and Optimization of Key Components of 500kA PTM

作　　者：于冠英 

机构地区：[1]中国有色(沈阳)冶金机械有限公司,辽宁沈阳110141

出　　处：《有色设备》2017年第2期23-29,共7页Nonferrous Metallurgical Equipment

摘　　要：本文结合有限元软件ANSYS对铝电解多功能机组的主梁、出铝小车移动架和工具小车回转支撑等主要部件进行了有限元结构分析。根据工具小车回转支撑的计算结果,对铝电解多功能起重机工具小车横梁的上下盖板厚度进行分析优化,可以找到既满足设计要求又充分降低成本的盖板厚度值,很大程度上缩短了设计时间,提高了设计的效率,压缩了研发的周期。In this paper,the finite element software ANSYS is used to analyze the main components such as the main girder of the aluminum electrolytic multifunctional unit, the moving frame of the aluminum trolley and the turning support of the tool trolley. According to the calculation results of the tool support, the thickness of the upper and lower cover of the crossbar of the aluminum electrolytic multifunction crane tool is analyzed and optimized,it can help to get the thickness value which both meets the design require-ments and fully reduces the cost of the cover plate, shortens the design time largely, improves the design efficiency,shortens the research and development cycle.

关 键 词：铝电解多功能起重机 ANSYS 仿真分析 分析优化 

分 类 号：TF351[冶金工程—冶金机械及自动化]