化学镀时间对无纺布表面镍镀层结构影响规律研究  

Study on the influence of plated time on structural property of Ni coating on non-woven paper substrate

作　　者：黄俊俊 王辉[1] 陈珍明 孙志平[4] 高敏[2] 李梦雨[2] 刘琦[2] 程薇[2] Huang Junjun Wang Hui Chen Zhenming Sun Zhiping Gao Min Li Mengyu Liu Qi Cheng Wei(Hefei Lucky ＆ Technology Industry Co., Ltd., Hefei 230041 Department of Chemical and Materials Engineering, H efei College, Hefei 230601 College of Chemistry and Bioengineering, Hezhou University, Hezhou 542899 Research Institute of Surface Engineering,Taiyuan University of Technology,Taiyuan 030024)

机构地区：[1]合肥乐凯科技产业有限公司,合肥230041 [2]合肥学院化学与材料工程系,合肥230601 [3]贺州学院化学与生物工程学院,贺州542899 [4]太原理工大学表面工程研究所,太原030024

出　　处：《化工新型材料》2017年第10期196-198,共3页New Chemical Materials

基　　金：中国科学院能量转换材料重点实验室开放课题基金(KF2016001);安徽省教育厅一般项目(KJ2015B1105905;KJ2015B1105906)

摘　　要：采用Pd2+活化结合化学镀镍工艺制备金属化的植物纤维无纺布,借助X射线衍射、扫描电镜、四探针等分析测试手段,研究化学镀时间对植物纤维无纺布表面镀镍层结构特性的影响规律。结果表明延长化学镀时间,植物纤维无纺布表面化学镀镍层结晶性能变好。当化学镀时间为10min时,植物纤维无纺布的质量为0.038g/cm2,镀层表面电阻率为0.2Ω·cm。The metalization of plant fiber non-woven paper were prepared by Pd2＋activating-electroless nickel plating.The effects of plated time on Ni coating on plant fiber non-woven paper were investigated using X-ray diffraction electron microscopy,scanning electron microscopy and four probe method.Results showed that the crystallization of plated coating increased with increase of plated time.The weigh of non-woven paper after electroless nickel plating was0.038 g/cm2,the surface electrical resistivity was 0.2Ω·cm,when the plated time was 10 min.

关 键 词：非织造布 化学镀 镍镀层 纤维 

分 类 号：TB306[一般工业技术—材料科学与工程] TS176[轻工技术与工程—纺织材料与纺织品设计]