基于ADAMS仿形飞锯机锯切功率的分析与研究  

Analysis and research of profiling flying saw power based on ADAMS

作　　者：梅克明 柴晓艳[1,2] 马鲁豪 郑燕武[1,2] MEIKe-ming;CHAIXiao- yan;MALu- hao;ZHENG Yan- wu(Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System, Tianjin University of Technology, Tianjin 300384, China;Electrical and Mechanical Engineering National Experimental Teaching Demonstration Center （Tianjin University of Technology） , Tianjin 300384, China)

机构地区：[1]天津理工大学天津市先进机电系统设计与智能控制重点实验室,天津300384 [2]机电工程国家级实验教学示范中心(天津理工大学),天津300384

出　　处：《重型机械》2017年第6期50-54,共5页Heavy Machinery

摘　　要：钢管仿形飞锯机是是用于随动锯切钢管的一种专用设备,是钢管生产过程中的关键设备。目前在方管以及异型管的锯切加工过程中,锯切功率的研究不足。以300 mm×300 mm钢管的加工为例,采用ADAMS进行仿真分析,对锯切功率进行研究,给出锯切功率变化的图像,并给出锯切功率最优解,对于飞锯机的锯切加工具有指导意义。Steel tube profiling flying saw is a special equipment to saw cutting steel tube in the steel tube pro-duction process. At present, the sawing power is not enough in the sawing process of square tube and special-shaped pipe. Taking 300 mm x 300 mm steel pipe as an example, this paper calculates the cutting power by using ADAMS simulation analysis, the images of cutting power changes and the optimal solution are obtained, after optimization design, the power fluctuate lowered from 92. 43% to 59. 97% , and the efficiency is im-proved ,which provides a guiding significance in flying saw cutting.

关 键 词：仿形飞锯机 仿真分析 锯切力 锯切功率 

分 类 号：TG333.22[金属学及工艺—金属压力加工]