AlPO4包覆对LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2性能的影响  

Effects of AlPO_4 coating on properties of LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2

作　　者：李琳[1] 郑浩[1] 刘青[1] 程劲松[1] 

机构地区：[1]安顺学院功能材料与资源化学重点实验室,贵州安顺561000

出　　处：《电源技术》2017年第11期1522-1525,共4页Chinese Journal of Power Sources

基　　金：贵州省教育厅重点项目(黔教合KY字[2013]176);安顺学院博士基金(Asxybsjj201509)

摘　　要：采用共沉淀法在LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2表面包覆Al PO4。利用X射线衍射仪、扫描电子显微镜和充放电测试技术研究Al P O4包覆对正极材料的晶体结构、微观形貌和电化学性能的影响。电化学性能测试结果表明:不同Al PO4包覆量对正极材料LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2物理性质、结构及电化学性能有显著影响。当采用Al PO4包覆量为1%时,循环性能最好,50次循环后,放电比容量仅降到176 m Ah/g,容量衰减最小,只有1.7%。表现出良好的电化学稳定性,同时材料的倍率性能也明显提高。AlPO4 coated LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 was prepared by chemical precipitation method. The structural and electrochemical properties of AlPO4-coated LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 electrodes were studied as function of the level of AlPO4 coating by using X-ray diffraction(XRD), scanning electron microscope(SEM), charge-discharge test and charge-discharge test. The results show that AlPO4 is uniformly distributed on the surface of the LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 particles. As the coating amount of 1.0%, the initial capacity of the coated LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 sample exhibits the best electrochemical performance. It shows the discharge specific capacity of 182.2 mAh/g, and initial capacity retention of 98.7% after 50 cycles.

关 键 词：LINI1/3CO1/3MN1/3O2 包覆 表面 锂离子电池 

分 类 号：TM912.9[电气工程—电力电子与电力传动]