基于相似理论的太阳能聚光器风载荷模拟与实验  

Simulation and experiments of wind loads on solar collector based on similarity theory

作　　者：臧卫 杨谋存[1] 朱跃钊[1] 

机构地区：[1]南京工业大学机械与动力工程学院,江苏南京211800

出　　处：《南京工业大学学报（自然科学版）》2017年第6期105-110,共6页Journal of Nanjing Tech University(Natural Science Edition)

基　　金：国家自然科学基金(51105192);国家科技支撑计划(2014BAJ01B06);江苏省自然科学基金(BK2010556)

摘　　要：基于相似理论建立了槽式太阳能聚光器(PTSC)的相似模型并对其进行Fluent数值模拟、实验研究以及理论分析。首先,建立了全尺寸模型与相似模型之间的力与压强的相似关系;然后,对风场中的相似模型在各个风速以及仰角下的风压进行模拟计算以及分析;最后对风场中相似模型受到风压的情况进行风洞实验测试验证模拟结果。模拟与实验结果表明,模拟计算结果与风洞实验结果具有很好的吻合度,平均误差为16.7%,说明计算模型较准确,可对小型聚光器风载荷结果进行相似处理后即可得到大型聚光器风载荷分布特性。The similarity modelof large-scale parabolic trough solar collector（PTSC） was investigated with numerical simulation by Fluent,wind tunnel test and theoretical analysis.Firstly,the similarity relation,such as force and pressure,was built up between the similarity model and the full size model.Secondly,the pressure of the similarity model was simulated and analyzed under different wind speeds and pitch angles.Finally,the wind tunnel test was carried out to verify the simulation results.The comparison between the simulation and experiments showed that there was a good agreement between the simulation and the wind tunnel test with an average error of 16.7%,which indicated that the similarity model simulation was more accurate,and the distribution characteristics of wind load on the full size model could be obtained from processing results of the similarity model.

关 键 词：槽式太阳能聚光器(PTSC) 相似理论 风载荷 FLUENT 风洞实验 

分 类 号：TK513.1[动力工程及工程热物理—热能工程]