应力分析技术在长输埋地高凝原油管道上的应用  

Application of Stress Analysis Technology in Long Distance Buried High Solidifying Crude Oil Pipeline

作　　者：郭大成[1] 

机构地区：[1]中国石油辽河油田油气集输公司,辽宁盘锦124010

出　　处：《管道技术与设备》2017年第6期57-60,共4页Pipeline Technique and Equipment

摘　　要：长输埋地高凝原油管道,一旦因应力集中过载出现开裂泄漏,停输抢修时间有限,存在全线凝管的风险。文中首先针对某长输埋地高凝原油管道出现裂纹的原因进行分析,然后采用数值模拟的方法分析出现裂纹的弯头应力集中情况,并对弯头补强前后的受力状态进行分析,最后对埋地高凝原油管道的设计、施工、运行提出建议。Long distance buried high solidifying crude pipeline has risk of a full line of coagulation,because stress concentration overload occurs cracking leakage,and the time of stop transportation and emergency repair is limited. Firstly,the causes of cracking in a long distance buried high solidifying crude oil pipeline were analyzed,then the numerical simulation method was used to analyze the stress concentration of the elbow,and the stress state before and after the elbow reinforcement was analyzed,finally,some suggestions on the design,construction and operation of the buried high solidifying crude oil pipeline were put forward.

关 键 词：高凝原油 埋地管道 裂纹 应力分析 应力集中 抢修 

分 类 号：TE8[石油与天然气工程—油气储运工程]