冷轧带钢消除残留乳化液的结构优化  

Structure Optimization for Cold Rolling Mill Residual Emulsion

作　　者：代丽莉 刘岩 

机构地区：[1]北京中冶设备研究设计总院有限公司,北京100029 [2]金风科创风电设备有限公司,北京100176

出　　处：《冶金设备》2017年第B07期99-101,共3页Metallurgical Equipment

摘　　要：冷轧带钢六辊轧机在轧制过程中对轧辊、带钢需要喷射大量且清洁度较高的乳化液。但轧制后的带钢表面必须保持清洁,因此在最后一架轧机出口处普遍配置有乳化液吹扫装置。本文通过分析乳化液残留的原因,对轧机出口设备进行优化,以获得清洁的带钢。A large number of emulsions with higher cleanliness are need during working mode for 6 - Hi cold rolling mill. The strip surface must be kept clean, so emulsion sweeping system widely used on exit side of last mill stand. In this paper, the reason for the residual emulsions are analyzed and the mill outlet equipment is optimized to obtain clean strip surface.

关 键 词：残留乳化液 吹扫设备 优化 

分 类 号：TG335.56[金属学及工艺—金属压力加工]