直径1.5mm微型永磁同步马达的设计与实验研究  

Design and Experiment of Micro Permanent Magnet Synchronous Motor With 1.5mm Diameter

作　　者：张正中[1] 卢超[2] 

机构地区：[1]金华职业技术学院,浙江金华321007 [2]华中科技大学,武汉430074

出　　处：《微电机》2017年第11期68-71,共4页Micromotors

基　　金：浙江省科学技术厅2013年省级公益技术研究工业项目(2013C31120)

摘　　要：设计了一种直径1.5mm微型永磁同步马达,马达转子为永磁体,定子采用可挠线圈与导磁外壳相结合的结构;通过电磁分析软件JMAG建立微马达数字模型并进行2D瞬态电磁场有限元分析,根据结果求得马达的感应电动势常数和转矩常数;研制了微型马达样机,测试其转速-反电动势与扭矩-电流曲线,结果显示样机实测值与仿真具有较好的一致性,为微型永磁马达进一步设计与应用提供理论数据和数字模型。A micro permanent magnet synchronous motor with 1.5mm diameter was designed in this paper. The motor was formed with permanent magnet rotor and flexible coil stator in magnetic cover. 2D transient a- naIysis and calculation was carried out for micro permanent magnet motor, which based on professional elec- tro-magnetic analysis software JMAG. According to the simulation results obtained, got the unloaded back EMF and torque constant of micro motor. Speed-EMF curve and torque-current curve of the micro motor pro- totype were tested. The test results show that the simulation results are correct and feasible, providing relia- ble foundation for the further design and application of the micro permanent magnet motor.

关 键 词：微型永磁马达 JMAG 可挠线圈 有限元分析 实验研究 

分 类 号：TM381[电气工程—电机]