一种车削中心上动力刀具与主轴同轴的调整方法  

The Adjustment Method of Power Tool and Spindle Coaxial in A Turning Center

作　　者：孔祥志[1] 陈经伟 史庆轩[1] 

机构地区：[1]沈阳机床股份有限公司,沈阳110142

出　　处：《现代制造技术与装备》2017年第10期89-90,共2页Modern Manufacturing Technology and Equipment

基　　金：国家科技重大专项"千台国产数控车床可靠性提升工程"(2013ZX04011-011)

摘　　要：现代机械加工中,尤其是工艺集中的加工要求,在数控车削中心上配置Y轴,同时使用动力刀具的场合逐渐增多。刀具主轴的中心与车床主轴的中心同轴度对机床加工精度有重要影响,而传统的调整同轴度的方法费时费力且同轴度不高。因此,本文提出一种通过样件测量的数据修正动力刀具中心与车床主轴中心同轴的方法。该方法使用方便,在实际生产中效率高,效果好。In the modern machining, especially in the process of centralized processing requirements, in the NC turning center on the configuration of the Y-axis, while the use of power tools in the occasion of the increase in the center of the tool spindle and the center of the lathe axis coaxial degree of machining accuracy The effect is very important. The traditional method of adjusting the coaxiality is time-consuming and the coaxiality is not high. This paper presents a method to correct the power tool center and the center of the lathe spindle by the data of the sample. It is easy to use, Production efficiency is high, the effect is good.

关 键 词：车削中心 Y轴 主轴同轴 

分 类 号：TG519.1[金属学及工艺—金属切削加工及机床]