双钢板混凝土组合剪力墙轴压承载力研究  

Study on axial compressive bearing capacity of composite shear wall with double-skin steel plate

作　　者：郝婷玥[1,2] 曹万林 HAO Ting-yue;CAO Wan-lin(Key Laboratory of Urban Security and Disaster Engineering of China Ministry of Education, Beijing University of Technology, Beijing 100124, China;School of Civil Engineering, Tangshan University, Tangshan 063000, China)

机构地区：[1]北京工业大学城市与工程安全减灾教育部重点实验室,北京100124 [2]唐山学院土木工程学院,唐山063000

出　　处：《工程科学学报》2017年第11期1765-1773,共9页Chinese Journal of Engineering

基　　金：国家自然科学基金资助项目(51478020)

摘　　要：首先对双钢板混凝土组合剪力墙中的钢板进行了屈曲理论分析,对核心受约束混凝土进行了受力分析.以北京中国尊核心筒结构底部剪力墙为原型,进行了1/4缩尺模型的双钢板混凝土组合剪力墙试件和内置钢板混凝土组合剪力墙的轴压性能试验,对比分析其荷载-位移曲线、轴压承载力等.考虑到钢板屈曲对钢板轴压承载力的影响以及受约束混凝土轴心抗压强度的提高,提出了双钢板混凝土组合剪力墙轴压承载力的计算公式,与应用其他计算方法计算得到的试验试件的轴压承载力相比,本文提出的计算公式的计算结果与试验结果吻合度最高.结合其他文献中双钢板混凝土组合剪力墙轴压性能试验的相关数据进行验证,表明利用本论文提出的计算公式得到的轴压承载力计算值与试验结果吻合较好.This study conducted a steel-plate buckling analysis and a stress analysis of confined core concrete in a composite shear wall with a double-skin steel plate. Using the bottom shear wall of a core tube in the Beijing Chinese Statue as a prototype,the study tested the 1/4-scale concrete composite shear wall with a double-skin steel plate and a composite shear wall with an embedded steel plate with respect to axial compression,and then compared and analyzed the axial bearing capacity and load-displacement curves.Considering the influence of steel-plate buckling on the axial bearing capacity and the improved compressive strength of confined concrete,this paper proposes a calculation formula for the bearing capacity of a composite shear wall with a double-skin steel plate. Comparing this calculated values with those of other methods,the calculated values of this proposed method fits best. Based on relevant data in the literature regarding axial compression performance tests of composite shear walls with a double-skin steel plate,the axial compressive bearing capacity values obtained by this proposed formula are in good agreement with experimental results.

关 键 词：组合剪力墙 双钢板 轴压承载力 钢板屈曲 受约束混凝土 

分 类 号：TU398.2[建筑科学—结构工程] TU317.1