Transport and selectivity of indium through polymer inclusion membrane in hydrochloric acid medium  

作　　者：Xiaorong Meng Conghui Wang Pan Zhou Xiaoqiang Xin Lei Wang 

机构地区：[1]School of Science, Xi'an University of Architecture and Technology, Xi'an 710055, China [2]School of Environmental & Municipal Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China [3]Key Laboratory of Membrane Separation of Shaanxi Province, Xi'an 710055, China

出　　处：《Frontiers of Environmental Science & Engineering》2017年第6期79-88,共10页环境科学与工程前沿（英文）

基　　金：Acknowledgements This research is supported by Innovative Research Team of Xi＇an University of Architecture and Technology; the National Natural Science Foundation of China （Grant Nos. 51178378 and 51278408） and the Youth Science Foundation Project （No. 21607118）.

摘　　要：In the present paper, a polymer inclusion membrane （PIM） containing polyvinyl chloride （PVC）, and bis-（2-ethylhexyl） phosphate （D2EHPA） which was used as extracting agent was used for the recovery of In（Ⅲ） ions in hydrochloric acid medium. The effects of carrier concentration, feed phase pH, strip phase HCI concentration, temperature on the transport, and the membrane＇s stability and thickness were examined. And the conditions for the selective separation of In（Ⅲ） and CU（Ⅱ） were optimized. The results showed that the transport of In（Ⅲ） across PIM was consistent with the first order kinetics equation, and also it was controlled by both the diffusion of the metal complex in the membrane and the chemical reaction at the interface of the boundary layers. The transport flux （J0） was inversely proportional to the membrane thickness, however, the transport stability improved as the membrane thickness increased. The transport flux of In（Ⅲ） and CU（Ⅱ） was decreased by excessive acidity of feed phase and high concentration of Cl^- . The selectivity separation coefficient of In（Ⅲ）/Cu（Ⅱ） was up to 34.33 when the original concentration of both In（Ⅲ） and Cu（Ⅱ） was 80 mg· L^ -1 as well as the pH of the feed phase and the concentration of Cl^- in the adjusting context were 0.6 and 0.5 mol· L^-1, respectively. Within the range of pH = 1-3, the separation selectivity of In（Ⅲ）/Cu（Ⅱ） reached the peak in the case when the Cl^- concentration was 0.7 mol·L^ -1.In the present paper, a polymer inclusion membrane （PIM） containing polyvinyl chloride （PVC）, and bis-（2-ethylhexyl） phosphate （D2EHPA） which was used as extracting agent was used for the recovery of In（Ⅲ） ions in hydrochloric acid medium. The effects of carrier concentration, feed phase pH, strip phase HCI concentration, temperature on the transport, and the membrane＇s stability and thickness were examined. And the conditions for the selective separation of In（Ⅲ） and CU（Ⅱ） were optimized. The results showed that the transport of In（Ⅲ） across PIM was consistent with the first order kinetics equation, and also it was controlled by both the diffusion of the metal complex in the membrane and the chemical reaction at the interface of the boundary layers. The transport flux （J0） was inversely proportional to the membrane thickness, however, the transport stability improved as the membrane thickness increased. The transport flux of In（Ⅲ） and CU（Ⅱ） was decreased by excessive acidity of feed phase and high concentration of Cl^- . The selectivity separation coefficient of In（Ⅲ）/Cu（Ⅱ） was up to 34.33 when the original concentration of both In（Ⅲ） and Cu（Ⅱ） was 80 mg· L^ -1 as well as the pH of the feed phase and the concentration of Cl^- in the adjusting context were 0.6 and 0.5 mol· L^-1, respectively. Within the range of pH = 1-3, the separation selectivity of In（Ⅲ）/Cu（Ⅱ） reached the peak in the case when the Cl^- concentration was 0.7 mol·L^ -1.

关 键 词：Polymer inclusion membrane Selective transport D2EHPA In（Ⅲ） Cu（Ⅱ） 

分 类 号：T0[一般工业技术]