石油树脂/氯化丁基橡胶复合材料的性能及其在桥梁支座中的应用  

Properties of Petroleum Resin/Chlorinated Butyl Rubber Composite and Its Application in Bridge Bearing

作　　者：郭大通 岳耀 杨守申 赵秀英[1,2] 张立群[1,2] GUO Datong;YUE Yao;YANG Shoushen;ZHAO Xiuying;ZHANG Liqun(Beijing University of Chemical Technology,Beijing 100029, China)

机构地区：[1]北京化工大学北京市新型高分子材料制备与加工重点实验室,北京100029 [2]北京化工大学北京市先进弹性体工程技术研究中心,北京100029

出　　处：《橡胶工业》2017年第12期744-748,共5页China Rubber Industry

摘　　要：对石油树脂(PR)/氯化丁基橡胶(CIIR)复合材料的性能进行研究,并将其用于高阻尼桥梁支座的制作。结果表明:相比于未加PR的CIIR硫化胶,PR/CIIR复合材料的损耗峰向高温方向移动,有效阻尼温域得到拓宽;随着PR用量的增大,PR/CIIR复合材料的拉伸强度和压缩模量逐渐减小,拉断伸长率和压缩永久变形不断增大;当PR用量为10份时,复合材料的压缩模量最大,压缩永久变形较小,阻尼温域得到拓宽,且拉伸强度和拉断伸长率均满足交通部标准要求,用其制作的高阻尼桥梁支座的竖向刚度和水平等效刚度也达到标准要求。The properties of petroleum resin（PR）/chlorinated butyl rubber（CIIR）composite were studied,and a high damping seismic isolation rubber bearing with PR/CIIR composite was made. The results showed that,the dynamic loss factor peaks of PR/CIIR composite were broadened and moved to high temperature area compared with those of CIIR vulcanizate without PR. With the increase of PR content,the tensile strength and compression modulus of PR/CIIR composite decreased gradually,but elongation at break and compression set increased significantly. When the addition level of PR was 10 phr,the PR/CIIR composite had the maximum compression modulus and small compression set,the damping temperature range was broadened,the tensile strength and elongation at break met the requirements of standards set by the Ministry of Transport of China,and the vertical stiffness and equivalent lateral stiffness of the high damping seismic isolation rubber bearing produced by using the PR/CIIR composite also met the requirements of standards.

关 键 词：氯化丁基橡胶 石油树脂 复合材料 高阻尼支座 竖向刚度 水平等效刚度 

分 类 号：TB332[一般工业技术—材料科学与工程] U443.36[建筑科学—桥梁与隧道工程]