检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]辽宁科技大学研究生院,辽宁鞍山114001 [2]辽宁科技大学材料与冶金学院,辽宁鞍山114001
出 处:《轻合金加工技术》2017年第12期18-24,共7页Light Alloy Fabrication Technology
摘 要:为了获得稀土镁合金薄带,采用挤压-轧制联合工艺路线,对厚度为1.4 mm的MnE21镁合金挤压板坯进行轧制试验。采用温轧工艺轧制出厚度为0.5 mm、0.4 mm、0.3 mm、0.2 mm的薄带,并对不同厚度的轧制薄带进行了微观组织和力学性能的对比分析。结果表明,不同厚度的薄带的抗拉强度Rm相差并不明显,Rm维持在200 N/mm2左右,但随着板带减薄,各向异性逐渐减小。MnE21镁合金薄带中的稀土相细小且均匀分布,合金的组织得到充分细化。In order to obtain thin sheets of magnesium alloy with rare earth, 1.4 mm extruded plates were warm rolled to 0.5 mm, 0.4 mm, 0.3 mm and 0.2 mm sheets at various reduction rates with the extrusion-rolling combined technology. Microstructure and mechanical properties of MnE21 sheets with different thicknesses were analyzed after rolling. The tensile strength is about 200 N/mm^2 with inconspicuous difference and the anisotropy decreases as the sheets become thinner. The fine rare earth phase is distributed homogenously in the rolling sheets and the grains are refined sufficiently.
分 类 号:TG339[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28