检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]北京科技大学土木系,北京100083 [2]土木工程防灾国家重点实验室(同济大学),上海200092
出 处:《哈尔滨工业大学学报》2017年第12期45-52,共8页Journal of Harbin Institute of Technology
基 金:土木工程防灾国家重点实验室开放基金(SLDRCE15-01)
摘 要:为研究Rayleigh阻尼系数参考频率选取方法对结构地震反应的影响,以一个长85.2 m,宽61.8 m的网壳为例,对比分析了基于地震波频谱特性选取第二个参考频率的方法、Idriss方法、传统方法、优化方法所得Rayleigh阻尼系数引起顶点位移和基底剪力计算误差.对于地震波的频谱特性,讨论了拟加速度反应谱、拟速度反应谱、位移反应谱的峰值频率和形心点频率的统计范围.数值计算结果表明:基于拟速度反应谱、位移反应谱峰值频率和形心频率以及Fourier谱的峰值频率所得Rayleigh阻尼将使计算结果偏小;用小于基本周期范围内的拟加速度反应谱的峰值频率或形心点频率作为第二个参考频率计算误差较小;当地震波的卓越频率大于基频的结构时,Idriss方法用平滑化Fourier谱的卓越频率计算参考频率效果更好;优化方法可以直接得到Rayleigh阻尼系数,避免了人为选取参考频率的任意性,且计算精度高.To analyze the effects of Rayleigh damping coefficients reference frequency selection method on structural seismic response, some methods to estimate Rayleigh damping coefficients including the frequency contents-based second reference frequency, IDRISS method, traditional method and the optimization method were compared by the errors of top displacement and base shear with a 85.2 m length, 61.8 m width reticulated shell. As for the frequency contents of earthquake waves, the statistics ranges of the peak and centroid frequencies of pseudo-acceleration-, pseudo-velocity- and displacement response spectrum were discussed. The numerical results show that: the second reference frequency specified by the peak and centroid frequencies of the pseudo-velocity- and displacement response spectrum as well as peak frequency of the Fourier spectrum make the response results smaller than the exact ones. The estimation error is reasonable, which the second reference frequency is equal to the peak and centroid frequencies of the pseudo-acceleration response spectrum in the range below the fundamental frequency. It is suitable that the reference frequency is estimated by the smoothing peak frequency of the Fourier spectrum in the IDRISS method when the predominant frequency of earthquake wave is greater than the fundamental frequency of structure. Optimization method can get the Rayleigh damping coefficient directly, eliminate the arbitrariness of reference frequency and have high calculation accuracy.
关 键 词:地震反应 Rayleigh阻尼 卓越频率 参考频率 优化方法
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.17.141.114