成分配比、含水量对烧结法合成CA_6的影响  

The Ingredient Percentage and Water Content on Sintering Synthesis of CA_6

作　　者：吴童 张红鹰[1] 黄玉亭 

机构地区：[1]山东理工大学材料科学与工程学院,淄博255000

出　　处：《山东陶瓷》2017年第5期6-9,共4页Shandong Ceramics

摘　　要：本论文用XRD衍射分析手段讨论了Al_2O_3与CaCO_3的配比对烧结合成CA_6的影响,得出成分配比为6∶1,含水量8.2%时制备的CA_6的相对含量最高,纯度最高;用SEM电镜分析样品的晶体形貌,得出成分配比为9∶1时CA_6的晶粒形貌发育最完善。XRD analysis was used in this paper.The effects of Al2O3 and CaCO3 ratio on sintering synthesis of CA6 is discussed.The results show CA6 purity is the highest when the ratio of 6 ： 1, and water content of 8.2%. Crystal morphology was analyzed by SEM scanning electron microscope method, the result is that CA6 is the best of grain morphology at the ratio of 9 ： 1.

关 键 词：六铝酸钙 烧结法 成分配比 含水量 

分 类 号：TQ132.32[化学工程—无机化工]