射弹参数对侵彻防护液舱效果的影响研究  

Effect of Projectile Parameters on Penetration Protection Tank

作　　者：黄阳洋 王志军[1] 赵鹏铎[2] 张磊[2] 张鹏[1,2] 王庆[1,2] 

机构地区：[1]中北大学机电工程学院,太原030051 [2]海军装备研究院,北京100161

出　　处：《兵器装备工程学报》2017年第12期90-92,97,共4页Journal of Ordnance Equipment Engineering

摘　　要：为研究射弹速度、长径比、质量对弹体侵彻能力的影响,利用AUTODYN软件模拟了不同条件下铜质射弹侵彻防护液舱的过程,分析比较了射弹剩余速度和侵彻深度。结果表明:在1 800~2 400 m/s速度区间内,射弹速度越大,对液舱侵彻效果越差;提高射弹长径比可有效增加侵彻效果;射弹质量增加到某一临界值前,也可有效提高侵彻效果。In order to explore the effect of different initial velocity,slenderness ratio and mass,AUTODYN was used to simulate the process of copper projectile in various states. Residual velocity and penetration depth was analyzed and compared. Results as follows： Higher initial velocity make a worse impact when it between 1 800 m/s to 2 400 m/s; enhancement of slenderness ratio can improve the penetration obviously;increasing the mass before a critical value can also improve penetration.

关 键 词：防护液舱 铜射弹 剩余速度 侵彻深度 

分 类 号：TJ410.6[兵器科学与技术—火炮、自动武器与弹药工程]