在用点燃式发动机轻型汽车稳态工况法排气污染物排放限值修订方法研究  

Research on the method of revise limits for exhaust pollutants from in-use light-duty vehicle equipped ignition engine with steady-state mode conditions

作　　者：张静 刘宁锴[2] 周平 ZHANG Jing;LIU Ningkai;ZHOU Ping(Jiangsu Taihu Water Quality Moni- toring Center Station, Nanjing J iangsu 210036;J iangsu Environmental Monitoring Center, Nanjing J iangsu 210036;J iangsu Provincial Committee of the Chinese People＇s Political Consultative Conference, Nanj ing J iang- su 210024)

机构地区：[1]江苏省太湖水质监测中心站,江苏南京210036 [2]江苏省环境监测中心,江苏南京210036 [3]中国人民政治协商会议江苏省委员会,江苏南京210024

出　　处：《环境污染与防治》2017年第12期1391-1393,共3页Environmental Pollution & Control

基　　金：美国能源基金第四期机动车污染防治研究;江苏省环保科研课题(No.2013065)

摘　　要：针对机动车尾气污染物检测现状,提出了对在用点燃式发动机轻型汽车稳态工况法排气污染物排放限值的修订方法,即首先收集在用汽车尾气排放检测数据,依次按照汽车类型、注册登记日期及基准质量进行划分;通过数据整体性分析,确定调整基础、调整档次;再通过各因子不合格贡献率分析,确定检测因子优先调整级别;最后,以江苏省国Ⅰ、国Ⅱ阶段轻型汽车的尾气排放检测数据为例,对提出的修订方法进行了实证研究。结果表明,该方法可很好解决修订排放限值的问题。According to the presence of the exhaust pollutants detection from in-use light-duty spark ignition vehicles under steady-state mode conditions,apollutant emission limits revision method was presented.At the first stage,the gathered detection data of the exhaust pollutants was classified based on the vehicle type,registered time and reference quality.Then integrity analysis was used to confirm the adjusted base and lever,and the analysis of the unqualified contribution rate of factors was used to confirm the adjustment rank.Finally,detection data of the exhaust pollutants from the stage CHINA ⅠandⅡin Jiangsu Province was taken as a case study.The result showed that the method could solve the problem of revising the emission limits perfectly.

关 键 词：在用点燃式发动机轻型汽车 稳态工况法 排放限值 修订方法 

分 类 号：X734.2[环境科学与工程—环境工程]