检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:何国玺 王宝莹 林默涵 李岩松[1] 孙丽颖 吴梦雨 梁永图[1] HE Guoxi;WANG Baoying;LIN Mohan;LI Yansong;SUN Liying;WU Mengyu;LIANG Yongtu(Beijing Key Laboratory of Urban Oil and Gas Transportation Technology ,China University of Petroleum- Beijing,Beijing 102200,China;SINOPEC Sales Company South China Branch, Guangzhou 510620, China;SINOPEC Engineering Incorporation (SEI) , Beijing 100101, China)
机构地区:[1]中国石油大学(北京)城市油气输配技术北京市重点实验室,北京102249 [2]中国石化销售华南分公司,广东广州510620 [3]中石化工程建设公司(SEI),北京100101
出 处:《北京石油化工学院学报》2017年第4期75-82,共8页Journal of Beijing Institute of Petrochemical Technology
基 金:国家自然科学基金项目(51474228);北京市科学研究与研究生培养共建项目科研项目(ZX20150440)
摘 要:由于管道腐蚀、自然灾害以及第三方破坏,管道泄漏事故频发。为了研究油品在含水土壤中的渗流扩散规律,建立了埋地管道截面区域油品泄漏过程的"泄漏-渗流-扩散"数值模型。基于实际泄漏工况数据,分析了导压系数、泄漏孔大小、泄漏流量、管道直径、泄漏位置、埋深、重力、土壤含水饱和度等影响渗流扩散范围的敏感性。并预测了给定埋地管道条件下,泄漏油品扩散的范围及到达地面的时间。研究结果可为处理埋地管道泄漏事故提供参考。The diffusion of leaking oil is significant for research on prediction of leakage area and establishment of repairing scheme. This paper builds the prediction model for leakage intensity of pipeline buried in soil and the 'leakage-seepage-diffusion" numerical simulation model. Based on the working data of leakage, the leakage velocity is calculated. The anisotropy of both seepage and diffusion is obtained, including the sensitivity of the water saturation, the porosity, the diffusion resistance, the leakage velocity, the pipeline diameter, the leakage location, and the size of leakage hole on the diffusion area. Based on the distribution of water saturation, this paper predicts the diffusion area of leakage, time of arrival at the land surface and adjacent waters, and the volume of oil leaking into waters. The results can offer reference for disposing of pipeline leakage in aqueous areas.
关 键 词:埋地成品油管道 泄漏 油品扩散 泄漏强度 扩散范围预测
分 类 号:TE973[石油与天然气工程—石油机械设备]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38