齿轮传动激励下采煤机摇臂振动特性  

Vibration Characteristics for the Rocker Arm of Shearer with Gear Meshing Excitation

作　　者：张睿 张义民 朱丽莎[1] 赵春雨[1] 

机构地区：[1]东北大学机械工程与自动化学院,辽宁沈阳110819 [2]沈阳化工大学机械工程学院,辽宁沈阳110142

出　　处：《东北大学学报（自然科学版）》2018年第1期108-111,117,共5页Journal of Northeastern University(Natural Science)

基　　金：国家重点基础研究发展计划项目(2014CB046303);国家自然科学基金资助项目(51405072)

摘　　要：为研究采煤机摇臂齿轮系统啮频耦合规律及齿轮传动激励下摇臂壳体振动特性,进行摇臂振动特性实验.根据齿轮参数,计算啮合频率,得到齿轮传动激励频率成分.通过有限元模型及实验模态分析,得到摇臂固有特性.通过振动特性实验,测量摇臂振动加速度,进行时域及频域分析,得到传动系统啮频耦合规律.结果表明:传动系统启动冲击约为重载截割冲击的2倍;平稳运行时行星级振动峰值最大;摇臂形成了以第3、第5阶振型为主的弹性振动;行星级与惰轮级结合处频率耦合作用最强,主要形式为各特征频率倍频组合频率.频率耦合是造成摇臂共振的主要原因.Experimental research was carried out to study the meshing frequency coupling laws of gear system and vibration characteristics of the rocker arm shell under the gear meshing excitation.According to the gear parameters,the meshing frequency of the system was calculated and the harmonic frequency components were obtained. Based on the finite element model and experimental modal analysis,the inherent characteristics of the rocker arm shell was obtained.Through the rocker arm dynamic characteristics experiment,the vibration accelerations were obtained. Time domain and frequency domain analysis were carried out to get the transmission system frequency coupling rules. Results show that the impact of starting is about 2 times of that of heavy load. The vibration peak occurs on the planetary transmission in steady operation. The main vibration modes of rocker arm are the third and the fifth stages. The joint of planetary and idler has the strongest coupling frequency and the main form of coupling is the combination of characteristic frequencies. Frequency coupling is one of the main reasons that lead to resonance of rocker arm.

关 键 词：采煤机摇臂 实验模态分析 振动特性实验 频率耦合 内激励 

分 类 号：TD421[矿业工程—矿山机电]